VG2408A-MHD Specifications

Technical Specifications

Item	Category	Specifications
Model	P/N.	VG2408A-MHD
Model	No.	VS19713
LCD	Type	IPS, Color a-Si TFT Active Matrix 1920 x 1080 LCD; 0.2745 (H)mm x 0.2745 (V)mm pixel pitch
	Display Size	60.4 cm (23.8" viewable)
	Color Filter	RGB vertical stripe
	Glass Surface	Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal	Video Sync	Analog D-SUB: fh:24~86 kHz, fv:48~75 Hz TMDS digital (100 Ω) DisplayPort (v. 1.2): fh:30~115 kHz, fv:48~100 Hz HDMI (v. 1.4): fh:30~115 kHz, fv:48~100 Hz
Compatibility	PC	up to 1920 x 1080
Compatibility	Macintosh	up to 1920 x 1080
Resolution^[1]	Recommended	1920 x 1080 @ 60Hz
Resolution^[1]	Supported	1920 x 1080 @ 50, 60, 75, 100Hz^[2] 1680 x 1050 @ 60Hz 1600 x 1200 @ 60Hz 1600 x 900 @ 60Hz 1440 x 900 @ 60, 75Hz 1440 x 576 @ 50Hz 1400 x 1050 @ 60, 75Hz 1366 x 768 @ 60Hz 1360 x 768 @ 60Hz 1280 x 1024 @ 50, 60, 75Hz 1280 x 960 @ 50, 60, 75Hz 1280 x 800 @ 60, 75Hz 1280 x 768 @ 50, 60, 75Hz 1280 x 720 @ 50, 60Hz 1152 x 900 @ 66Hz 1152 x 870 @ 75Hz 1152 x 864 @ 60, 75Hz 1024 x 768 @ 50, 60, 70, 72, 75Hz 1024 x 600 @ 60Hz 848 x 480 @ 60Hz 832 x 624 @ 75Hz 800 x 600 @ 56, 60, 72, 75Hz 720 x 576 @ 50Hz 720 x 480 @ 60Hz 720 x 400 @ 70Hz 640 x 480 @ 50, 60, 67, 73, 75Hz 640 x 400 @ 60, 70Hz 640 x 350 @ 70Hz
Power^[3]	Input Voltage	AC 100-240V, 50/60Hz (auto switch)
Display Area	Full Scan (H x V)	527.04 x 296.46 mm (20.75” x 11.67”)
Operating Conditons	Altitude	16,000 feet (5 km)
	Humidity	20% to 90% (non-condensing)
	Temperature	0° C to 40° C (32° F to 104° F)
Storage Conditions	Altitude	40,000 feet (12.1 km)
	Humidity	5% to 90% (non-condensing)
	Temperature	-20° C to 60° C (-4° F to 140° F)
Dimensions	Physical (W x H x D)	541.86 x 516.2 x 223mm (21.33” x 20.32” x 8.78”)
Wall Mount	Dimensions	100 x 100 mm
Weight	Physical	5.2 kg (11.46 lbs)
Power Saving Modes	On^[4]	16W (Typical) without audio 19W (Typical) with 50% audio
Power Saving Modes	Off	≤ 0.3W (Max)

↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
↑ Timing: 1920 x 1080 @ 100Hz is only available for DisplayPort and HDMI inputs.
↑ Please use the power adapter from ViewSonic® or an authorized source only.
↑ The test condition follows EEI standards.

[1] Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.

[2] Timing: 1920 x 1080 @ 100Hz is only available for DisplayPort and HDMI inputs.

[3] Please use the power adapter from ViewSonic® or an authorized source only.

[4] The test condition follows EEI standards.

[1]

[2]

[3]

[4]