VA2932-mhd Specifications

Technical Specifications

Model No.	P/N
VS18274	VA2932-mhd

Item	Category	Specifications
LCD	Type	IPS type, Color a-Si TFT, Active Matrix 2560 x 1080 LCD; 0.2628 mm x 0.2628 mm pixel pitch
	Display Size	73.7 cm, (29" viewable)
	Color Filter	RGB vertical stripe
	Glass Surface	Hard coating (3H), Anti-Glare (Haze 25%)
Input Signal	Video Sync	TMDS digital (100 Ω) HDMI (v. 1.4): fh:24-86 kHz, fv:48-75 Hz DisplayPort (v. 1.2): fh:24-86 kHz, fv:48-75 Hz
Compatibility	PC	up to 2560 x 1080
	Macintosh	up to 2560 x 1080
	Recommended	2560 x 1080 @ 60Hz
Resolution^[1]	Supported	2560 x 1080 @ 60, 75Hz 1920 x 1080 @ 50, 60Hz 1680 x 1050 @ 60Hz 1600 x 1200 @ 60Hz 1600 x 900 @ 60Hz 1440 x 900 @ 60, 75Hz 1440 x 576 @ 50Hz 1400 x 1050 @ 60, 75Hz 1366 x 768 @ 60Hz 1360 x 768 @ 60Hz 1280 x 1024 @ 50, 60, 75Hz 1280 x 960 @ 50, 60, 75Hz 1280 x 800 @ 60, 75Hz 1280 x 768 @ 50, 60, 75Hz 1280 x 720 @ 50, 60Hz 1152 x 900 @ 66Hz 1152 x 870 @ 75Hz 1152 x 864 @ 60, 75Hz 1024 x 768 @ 50, 60, 70, 72, 75Hz 1024 x 600 @ 60Hz 848 x 480 @ 60Hz 832 x 624 @ 75Hz 800 x 600 @ 56, 60, 72, 75Hz 720 x 576 @ 50Hz 720 x 480 @ 60Hz 720 x 400 @ 70Hz 640 x 480 @ 50, 60, 66, 72, 75Hz 640 x 400 @ 60, 70Hz 640 x 350 @ 70Hz
Power Adapter^[2]	Input Voltage	AC 100-240V, 50/60Hz (auto switch)
Display Area	Full Scan (H x V)	672.768 x 283.824 mm (26.49” x 11.17”)
Audio	Speaker	2W x 2
Operating Conditons	Temperature	0° C to 40° C (32° F to 104° F)
	Humidity	10% to 90% (non-condensing)
	Altitude	16,000 feet (5 km)
Storage Conditions	Temperature	-20° C to 60° C (-4° F to 140° F)
	Humidity	5% to 90% (non-condensing)
	Altitude	40, 000 feet (12.1 km)
Dimensions	Physical (W x H x D)	689.3 x 407.9 x 185 mm (27.1” x 16.1” x 7.3”)
Wall Mount	Dimensions	100 x 100 mm
Weight	Physical	4.31 kg (9.5 lbs)
Power Saving Modes	On^[3]	27W (Typical) without audio 28W (Typical) witth audio
Power Saving Modes	Off	≤ 0.3W

↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
↑ Please use the power adapter from ViewSonic® or an authorized source only.
↑ The test condition follows EEI standards.

[1] Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.

[2] Please use the power adapter from ViewSonic® or an authorized source only.

[3] The test condition follows EEI standards.

[1]

[2]

[3]