LDP108-121 Introduction
Package Contents
| Item | Quantity | Note | |
|---|---|---|---|
| Cabinet Sections |  |
4 sections total | One (1) Left, two (2) Middle, and one (1) Right. |
| System Control Box (Left and Right sides) |
 |
2 sides | |
| Quick Start Guide |  |
1 | |
| LED Modules |  |
64 modules | The quantity of spare LED modules will vary by country. |
| Remote Control |  |
1 | |
| Screws |  |
20 x M6x10mm (1) 32 x M6x50mm Expansion (2) (2) 32 x TA6x30mm (3) 12 x KM3x6mm (4) | |
| Hex Tool (Allen wrench) |
 |
2 | 1 x 5 mm 1 x 8 mm |
| System Control Box Covers (Left, Middle, and Right sides) |
 |
3 | |
| Wall Mounting Brackets |  |
4 | |
| Vacuum Suction Tool |  |
1 | |
| Anti-Static Glove |  |
2 pairs | |
| LAN Cable (5m) |  |
1 | |
| IR Extender (3m) |  |
1 | |
| Bag with LEDs |  |
1 bag (1,000 pieces) | Replacement LED beads specific to module batch number. Cannot be used on different LED module batch(es). |
- NOTE:
- This product is packed in an air transport box.
- Due to the size and weight, it is recommended that two or more people handle it.
Product Overview
Front Panel
Rear Panel
I/O Ports
| Number | Port | Description |
|---|---|---|
| 1 | HDMI OUT | Extend content out to another display device. |
| 2 | Audio OUT | Audio output to an external speaker. |
| 3 | Audio IN | Audio input from an external device. |
| 4 | S/PDIF Out | Multichannel sound via optical signals. |
| 5 | IR IN | Extend the IR Receiver. |
| 6 | USB 2.0 | USB Reader (5V/1.5A). |
| 7 | LAN | Standard RJ45 (10M/100M/1000M) Internet connection interface. |
| 8 | HDMI IN 2.0 | High definition input: PIP/PBP ,connect to PC with HDMI output, set-top box, or other video device. |
| 9 | HDMI IN 1.4 | High definition input: PIP/PBP ,connect to PC with HDMI output, set-top box, or other video device. |
| 10 | HDMI IN 2.1 | High definition input: connect to PC with HDMI output, set-top box, or other video device. |
| 11 | RS-232 | Serial control port. |
Control Panel
| Number | Port | Description |
|---|---|---|
| 1 | USB C | USB-C Reader (5V/2A) |
| 2 | USB 2.0 | USB Reader (5V/1.5A) |
| 3 | IR Receiver | Receiver for the Remote Control. |
| 4 | Brightness | Press to cycle through brightness levels. |
| 5 | Volume + | Increase the volume. |
| 6 | Volume - | Decrease the volume. |
| 7 | Input Select | Press to cycle through available input sources. |
| 8 | Stand-by | Press to enter Stand-by mode. |
- Locking the Control Panel
- When the administrator does not want others to use the control panel, it can be locked by pressing 1168+OK on the remote control.
Further Reading
 |