IFP55G1 On-Screen Display Menu Tree

    From ViewSonic User Guide Database


    On-Screen Display (OSD) Menu Tree

    Sub-menu Menu Option
    H Position (-/+, 0~100)
    V Position (-/+, 0~100)
    Clock (-/+, 0~100)
    Clock Phase (-/+, 0~100)
    Zoom Mode Full
    Normal (4:3)
    Real (1:1)
    Dynamic (16:9)
    21:9
    Auto Adjust OK
    Screen Reset Cancel
    Reset

    Sub-menu Menu Option
    VGA
    HDMI 1
    HDMI 2
    HDMI 3
    PC
    Type-C

    Sub-menu Menu Option
    Off
    Except PC (OPS)
    No Signal Input Only
    Black Board Mode

    (Auto Signal Detection: Off)

    Sub-menu Menu Option
    Picture Mode Normal
    Dynamic
    Soft
    User
    Contrast (-/+, 0~100)
    Brightness (-/+, 0~100)
    Color (-/+, 0~100)
    Tint (-/+, 0~100)
    Sharpness (-/+, 0~100)
    Color Temperature Warm (7500K)
    Normal (9300K)
    Cool (10000K)
    User
    Noise Reduction Off
    Low
    Medium
    High
    Overscan off
    On
    RGB Range Full Range
    Limited Range
    Auto
    Flicker Free Off
    On
    Blue Light Filter (-/+, 0~100)
    Gamma Set Native
    2.2
    2.4
    Backlight (-/+, 0~100)
    Picture Reset Cancel
    Reset

    Sub-menu Menu Option
    Volume Control Speaker
    Audio Out
    Sync
    Treble (-/+, 0~100)
    Bass (-/+, 0~100)
    Balance (-/+, 0~100)
    Volume (-/+, 0~100)
    Maximum Volume (-/+, 0~100)
    Minimum Volume (-/+, 0~100)
    Mute Off
    On
    Audio Out Sync Enable
    Disable
    Audio Out Volume

    (Line Out)

    (-/+, 0~100)
    Audio Reset Cancel
    Reset

    Sub-menu Menu Option
    Off Time Off
    1 hour~24 hours
    Date and Time Set Date
    Set Time
    Choose Time Zone
    Use 24-hour Format
    Schedule Schedule List
    Enable
    Start Time
    End Time
    Input HDMI 1
    HDMI 2
    HDMI 3
    PC
    Type-C
    VGA
    Dat of the Week
    Every Week
    OSD Turn Off Off
    5/15/30/60 seconds
    Input Information Off
    5/10/20/30/60 seconds
    Automatic Date & Time Off
    On
    Time Reset Cancel
    Reset

    Sub-menu Menu Option
    Display Information Model Name
    Serial No.
    Operation Hours
    SW Version

    Sub-menu Menu Option
    Saving Panel Saving Brightness Off
    On
    Power Save Mode 1
    Mode 2
    Mode 3
    Mode 4
    Power LED Light Off
    On
    Boot Boot On Source HDMI 1
    HDMI 2
    HDMI 3
    PC
    Type-C
    VGA
    Boot On Logo Off
    On
    Signal Auto Signal Detection Off
    On
    No Signal Standby off
    0 mins
    5 mins
    15 mins
    30 mins
    Port HDMI with One Wire Off

    (default)

    On
    USB Cloning Import
    Export
    USB Auto Play Off
    On
    Others Switch On State Power Off
    Forced On
    Last Status
    WOL Off
    On
    Monitor ID 1~98
    OSD Language
    Factory Reset Cancel
    Reset
    Advanced Option Reset Cancel
    Reset

    Sub-menu Menu Option
    Energy Start Off
    On
    Light Sensor Off
    On
    IP
    Port

    Sub-menu Menu Option
    Leave OSD Menu