CDE5530 Embedded Applications

    From ViewSonic User Guide Database
    CDE5530 Embedded Applications
    Introduction
    Remote Control
    Connecting Devices
    Using the Display
    General Settings
    On-Screen Display (OSD) Menu
    Embedded Applications
    RS-232 Protocols
    Specifications
    Regulatory and Service Information
    Safety Precautions
    Troubleshooting
    Maintenance

    vCast

    Working with ViewBoard® Cast software (vCast, vCast Pro, and vCastSender), the vCast application will allow the ViewBoard to receive laptop screens (Windows/Mac/Chrome) and mobile (iOS/Android) users’ screens, photos, videos, annotations, and camera(s) that are using the vCastSender application.

    ViewBoard Cast (vCast)
    NOTE:
    • ViewBoard® Cast software, laptops, and mobile devices can connect to both the same subnet and cross subnet by entering the on-screen PIN code.
    • Connected devices will show up under Device List on the same subnet connection.
    • If the device does not show up under Device List, users will need to key-in the on-screen PIN code.

    Network Information

    • Ports:
    TCP 56789, 25123, 8121 & 8000 (Controlling message port & client device audio transfer)
    TCP 8600 (BYOM)
    TCP 53000 (Request share screen)
    TCP 52020 (Reverse control)
    TCP 52025 (Reverse control for ViewBoard Cast Button)
    TCP 52030 (Status sync)
    UDP 48689, 25123 (Device searching and broadcast & client device audio transfer)
    UDP 5353 (Multicast search device protocol)
    • Port and DNS Activation:
    Port: 443
    DNS: https://vcastactivate.viewsonic.com
    • OTA Service:
    Server Port: TCP443
    Server FQDN Name: https://vcastupdate.viewsonic.com

    Casting from Windows, MacBook, and Chrome Devices

    IFP52 vCast Sender 1-1.png
    1. Ensure the client device (e.g., laptop) is connected to the same network as the ViewBoard.
      2. NOTE: The network name can be found under Room Network.
      VCast Computer 1.png
    2. On the client device, visit the address that is shown on the ViewBoard to download and install the vCastSender application.
    3. After installing, launch the vCastSender application.
    4. To connect to the ViewBoard, input the PIN code and click OK.
      5. NOTE: The PIN code can be found as highlighted below:
      VCast Computer 2.png
    5. Additionally, you can connect to the ViewBoard or display by clicking Device List then the Device Name listed.
      6. VCast Computer 3.png
      NOTE: The Device Name can be found as highlighted below:
      VCast Computer 4.png

    Casting from Android Devices

    VCast Mobile Update 1.png
    1. Ensure the client device (e.g., Android phone or tablet) is connected to the same network as the ViewBoard.
      2. NOTE: The network name can be found under Room Network.
      VCast Computer 1.png
    2. On the Android client device, scan the QR code shown on the ViewBoard to directly download the vCastSender application, or download the application from the Google Play Store.
      3. VCast Sender 3.png
    3. After installing, launch the vCastSender application.
    4. To connect to the display, input the PIN code and select OK.
      5. NOTE: The PIN code can be found as highlighted below:
      VCast Computer 2.png
    5. You can also connect to the ViewBoard by clicking Device List then the Device Name listed.
      6. VCast Sender Device List Scan.png
      NOTE: The Device Name can be found as highlighted below:
      VCast Computer 4.png
    6. Additionally, you can connect to the ViewBoard by selecting Scan then placing the on-screen QR code into the box to automatically connect.
      7. VCast Computer 5.png

    Casting from Apple iOS Devices

    Apple AirPlay® is compatible with vCast for screen mirroring and content streaming under the same subnet environment only. An “AirPlay Password” will be generated on-screen for connection when using AirPlay to cast to a ViewBoard.

    VCast Apple Main.png
    1. Ensure the client device (e.g., iPhone or iPad) is connected to the same network as the ViewBoard.
      2. NOTE: The network name can be found under Room Network.
      VCast Computer 1.png
    2. On the iOS client device, directly open AirPlay and select the Device Name of the ViewBoard to connect.
      3. NOTE: The Device Name can be found as highlighted below:
      VCast Computer 4.png
    3. Input the generated on-screen AirPlay Password on the client device to connect.
      4. VCast Sender 4.png
      NOTE: In a cross subnet environment, please download and connect with the vCastSender iOS application from the Apple App Store.
    4. You can also connect to the ViewBoard by selecting Scan then placing the on-screen QR code into the box to automatically connect.
      5. VCast Computer 5.png

    Other Default Applications

    Folders

    • Folders Overview

      Folders Overview

    • Folder Icons

      Folder Icons

    Number Item
    1 Storage Device Display
    2 Icons
    3 File Type Menu
    4 File Information
    5 Main Display Area

    File Type Menu

    Item Description
    All All types
    Doc OFFICE files
    Note Image stored by myViewBoard, Side Tool Bar, and remote control Screen Capture button.
    Picture Image files
    Media Audio and Video files

    vSweeper

    Clear unnecessary data and unwanted files.

    VSweeper 1.png

    Advanced Settings can also be customized to the user's needs.

    VSweeper 2.png
    Retrieved from "https://manuals.viewsonic.com/index.php?title=CDE5530_Embedded_Applications&oldid=52338"