Package Contents

PF1020 Pen Tablet
Pen
USB Type C to USB Type A Cable
Nib Removal Tool
Replacement Pen Nib
Quick Start Guide

Product Overview

NOTE: Shortcut Key functions can be customized using ViewSonic Pen Manager software.

Connecting to the Pen Tablet

The pen display can be connected to a computer by USB Type A to USB Type C.

NOTE: Keep the EMI core in place to reduce electronic interference and noise from the tablet.

Ensure the power of the computer and pen display are off before connecting them.
Connect the USB Type A end of the cable to the USB Type A port of your computer. Then connect the USB Type C end of the cable to the USB Type C port of the pen tablet.

Installing Drivers and Software (Windows)

System Requirements: Windows 7/8/10 or above.
Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at: https://www.viewsonicglobal.com/q/PF1020

ViewSonic Pen Manager

Open the installation file and install the driver.
After the installation completes, you will need to restart the computer.

Uninstalling the Driver

There are two ways to uninstall the driver:

Start > ViewSonic Pen Manager > Right Mouse Click > Uninstall

or

Open the Control Panel > Programs > Programs and Features > ViewSonic Pen Manager > select Uninstall/Change

Installing Drivers and Software (macOS)

System Requirements: 10.15 or above.
Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at: https://www.viewsonicglobal.com/q/PF720

ViewSonic Pen Manager

Open the Pen Display Driver installation file and install the driver.

After the installation completes, you will need to restart the computer.
After plugging in the Pen Display it will request some privacy settings to work correctly. Go to: System Preferences > Security & Privacy

Under Security & Privacy, check the box next to DigitizerDriver.app in both Accessibility and Input Monitoring.

The ViewSonic Pen Manager menu will now be visible at the bottom of System Preferences.

Uninstalling the Driver

Go to: Applications > Tablet Utility > Uninstall-Driver

After uninstalling the driver, restart your Mac.

Setting the Display Area (Windows)

After the pen display is connected to the computer, the Display settings will need to be adjusted. To access the computer’s Display settings:

Go to: Start > Settings > System > Display, or
Right Click on the Desktop and select Display settings.

Once inside the Display settings, ensure the pen display is selected and:

Display orientation is set to Landscape or Portrait (depending on your preference), and
Multiple displays is set to Extend these displays.

Pen Input Settings (Windows)

To adjust the pen input settings:

Open ViewSonic Pen Manager either by going to: Start > ViewSonic Pen Manager or selecting the ViewSonic Pen Manager icon from the System Tray.

Adjustments to the pen can be made by selecting the Pen tab.

Select the Mapping tab to adjust screen orientation and display.

Pen Input Settings (macOS)

To adjust the pen input settings:

Open ViewSonic Pen Manager by going to: System Settings > ViewSonic Pen Manager
Adjustments to the pen can be made by selecting the Pen tab.

Select the Mapping tab to adjust screen orientation and display format.

Select the Express Keys tab to customize the six (6) express keys on the pen display.

Technical Specifications

Item	Category	Specifications
Model	P/N.	PF1020
Model	No.	VS19361
Display	Size	10.1"
Display	Active Area	232 x 136 mm (9.1" x 5.4" in.)
Power	USB	5V/50mA, USB power supply
Operating Conditions	Temperature	0° C to 50° C (32° F to 122° F)
Operating Conditions	Humidity	20% to 80% (non-condensing)
Storage Conditions	Temperature	-20° C to 60° C (-4° F to 140° F)
Storage Conditions	Humidity	10% to 90% (non-condensing)
Dimensions	Physical (W x H x D)	265 x 195 x 9 mm (10.35" x 7.67" x 0.35" in.)
Weight	Physical	380g (0.838 lbs)
Power Consumption	On	0.25W (Typical)

Pen

Item	Specifications
Model No.	EMR-20S
Type	Electromagnetic resonance
Power Supply	Battery-less
Resolution	5080 LPI (lines per inch)
Pressure Sensitivity	8192
Report Rate	Average 250 PPS (points per second)
Pen Tilt Angle	+/- 60°
Detectable Height	5~10 mm above the tablet
OS Supported	Win10 (32/64 bit), Win8, Win 7, Win XP; Mac OS x 10.15 and above.

Compliance Information

This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Industry Canada Statement

CAN ICES-003(B) / NMB-003(B)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
The following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below.


Substance	Proposed Maximum Concentration	Actual Concentration
Lead (Pb)	0.1%	< 0.1%
Mercury (Hg)	0.1%	< 0.1%
Cadmium (Cd)	0.01%	< 0.01%
Hexavalent Chromium (Cr6⁺)	0.1%	< 0.1%
Polybrominated biphenyls (PBB)	0.1%	< 0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	< 0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%	< 0.1%
Butyl benzyl phthalate (BBP)	0.1%	< 0.1%
Dibutyl phthalate (DBP)	0.1%	< 0.1%
Diisobutyl phthalate (DIBP)	0.1%	< 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:

Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

USA & Canada:
https://www.viewsonic.com/us/go-green-with-viewsonic

Europe:
https://www.viewsonic.com/eu/environmental-social-governance/recycle

Taiwan:
https://recycle.moenv.gov.tw/

For EU users, please contact us for any safety/accident issue experienced with this product:

	ViewSonic Europe Limited Haaksbergweg 75 1101 BR Amsterdam Netherlands
	+31 (0) 650608655
	EPREL@viewsoniceurope.com
	https://www.viewsonic.com/eu/

Copyright Information

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.

ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).

Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

PF1020_UG_ENG_1a_20230807

Customer Service

Limited Warranty

Safety Precautions

Troubleshooting

Maintenance