• Print Print

LS901HD LS901-4K Remote Control

From ViewSonic Documentation
Revision as of 03:19, 5 November 2024 by VY (talk | contribs) (// via Wikitext Extension for VSCode)
Jump to: navigation, search

Remote Control

Remote Control
Remote Control
Number Button Description
1 AV Mute File:LS710HD LS751HD Power Icon.png Hides the screen picture and volume mute.
2 Power File:LS710HD LS751HD Power Icon.png Turns the projector On or Off.
3 Auto Sync File:LS710HD LS751HD Power Icon.png Automatically determines the best picture timings for the displayed image.
4 Source File:LS710HD LS751HD Power Icon.png Displays the input source selection bar.
5 Navigation Buttons File:LS710HD LS751HD Power Icon.png Navigates and selects the desired menu items and make adjustments.
6 Enter File:LS710HD LS751HD Power Icon.png Confirms the selection.
7 Menu/Exit File:LS710HD LS751HD Power Icon.png *Turns the On-Screen Display (OSD) Menu On or Off.
  • Go back to a previous OSD Menu.
  • Exit and Save menu settings.
8 Brightness File:LS710HD LS751HD Power Icon.png Displays the brightness mode selection bar.
9 Volume Up File:LS710HD LS751HD Power Icon.png Increase the volume level.
10 Keystone File:LS710HD LS751HD Power Icon.png Manually correct distorted images.
11 Volume Down File:LS710HD LS751HD Power Icon.png Decrease the volume level.
12 Video File:LS710HD LS751HD Power Icon.png Unsupported Button
13 VGA File:LS710HD LS751HD Power Icon.png Unsupported Button
14 HDMI File:LS710HD LS751HD Power Icon.png Selects the HDMI 1 or HDMI 2 input source.
15 Aspect File:LS710HD LS751HD Power Icon.png Displays the aspect ratio selection bar.
16 Page Up File:LS710HD LS751HD Power Icon.png Unsupported Button
17 Zoom In File:LS710HD LS751HD Power Icon.png Increases the projected image size.
18 Freeze File:LS710HD LS751HD Power Icon.png Freeze the projected image.
19 Zoom Out File:LS710HD LS751HD Power Icon.png Reduces the projected image size.
20 Page Down File:LS710HD LS751HD Power Icon.png Unsupported Button
21 Display Mode File:LS710HD LS751HD Power Icon.png Displays the color mode selection bar.
22 Mouse Mode File:LS710HD LS751HD Power Icon.png Unsupported Button
23 Mute File:LS710HD LS751HD Power Icon.png Mute/Unmute.

Remote Control - Receiver Range

IR Receiver Location
IR Receiver Location

To ensure proper function of the remote control follow the steps below:

  1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
  2. The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft)
Note: Refer to the illustration for the location of the infrared (IR) remote control sensor(s).

Replacing the Batteries

  1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
  2. Remove any existing batteries (if necessary) and install two AAA batteries.
Note: Observe the battery’s polarities as indicated.
  1. Replace the battery cover by aligning it with the base and pushing it back into position.
Note:
  • Avoid leaving the remote control and batteries in excessive heat or a humid environment.
  • Replace only with the same or equivalent type recommended by the battery manufacturer.
  • If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
  • Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LS901HD_LS901-4K_Remote_Control&oldid=53087"