• Print Print

VPC33 Initial Setup

From ViewSonic Documentation
Jump to: navigation, search
VPC33 Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Installing the VPC33

  1. Remove the slot-in PC cover of the display.
  2. Carefully insert the VPC33 into the PC slot of the display.
  3. Secure the VPC33 to the display with the two (2) screws.
    4. NOTE:
    • Please note that the three (3) antennas must be installed on the VPC33.
    • Please pay attention to the installation direction of the VPC33/VPC35/VPC37, with the vents facing outwards to avoid damage.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC33_Initial_Setup&oldid=37147"