VPC33 Using the Device

Selecting an Input Source

IFP Series

To select an input source:

1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
2. Press ▼/▲/◄/► on the remote control to select the PC source.
3. Press OK/ENTER on the remote control, or touch the input source directly.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

NOTE: The above image is for reference only and is subject to change without notice.

CDE Series

To select an input source:

1. Press INPUT on the remote control.
2. Press ▼/▲ on the remote control to select the PC source.
3. Press OK/ENTER on the remote control.
4. Press EPG/BACK on the remote control to exit.

NOTE: The above image is for reference only and is subject to change without notice.

IFPG1 Series

To select an input source:

1. Press INPUT on the front panel.
2. In the OSD Menu, touch INPUT.
3. Touch the PC input source directly.
4. Touch a blank area outside of the menu to exit.

NOTE: The above image is for reference only and is subject to change without notice.