Introduction

Package Contents

Monitor
Power Cord
Power Adapter
Video Cable
Quick Start Guide

Note: The cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

Front View
Rear View

I/O Ports

Number	Description
1	DC IN
2	HDMI
3	DP (DisplayPort)
4	Audio Out

Note: For more information about the 1 ★ / 2 / 3 / 4 / 5 key and its functions, refer to Hot Keys.

Initial Setup

Installing the Stand

Note: For safety and to ensure optimal performance, please position the monitor on a flat, stable surface. Failure to do so may lead to the monitor falling, causing damage to the monitor itself and/or posing a risk of personal injury.

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.

Note: For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.

Maximum Loading	Pad Patten (W x H)	Pad Hole	Screw Specification	Screw Quantity
14 kg	100 x 100 mm	Ø 5 mm	M4 x 10 mm	4 screws

Note: Mounting kits are sold separately.

Important: Before removing the stand, please turn off the monitor, disconnect all cables, and place the monitor on a flat, stable surface with the screen facing down.

Remove the stand.
Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four screws (M4 x 10 mm).
Follow the instructions that come with the purchased mounting kit to mount the monitor.

Using the Security Slot

To help prevent the monitor from being stolen, use a security slot locking device to secure the monitor to a fixed object.

Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.

Making Connections

Connecting to Power

Connect the power adapter to the DC IN jack at the rear of the monitor.
Plug the power cord plug into a power outlet.

Connecting to External Devices

Using the Monitor

Adjusting the Viewing Angle

Height Adjustment

Lower or raise the monitor to the desired height (0 to 90 mm).

Note: When adjusting, press down firmly along the adjustment track.

Swivel Adjustment

Swivel the monitor to the left or right for the desired viewing angle (± 360˚).

Tilt Adjustment

Tilt the monitor forwards or backwards to the desired viewing angle (-4˚ to 20˚).

Note:

When adjusting, support the stand firmly with one hand while tilting the monitor forwards or backwards with the other hand.
The monitor must be lifted to the highest position, then it can support 40° tilt.

Turning the Monitor On/Off

Plug the connected power adapter into a power outlet.
Press the Power button to turn on the monitor.
To turn the monitor off, press the Power button again.

Note: The monitor will still consume some power as long as the power cord is connected to the power outlet. If the monitor is not being used for a long period of time, please disconnect the power plug from the power outlet.

Using the Control Panel Keys

Use the Control Panel Keys ( 1 ★ / 2 / 3 / 4 / 5 ) to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings.

Quick Menu

Press the 1 ★ key to activate the Quick Menu.

Note: Follow the key guide that appears on the screen to select the option or make adjustments.

Menu		Description
	ViewMode	Select one of the preset color settings.
	Volume	Adjust the level, or mute the volume.
	Contrast/Brightness	Adjust the contrast or brightness level.
	Input Select	Select the input source.
	Exit	Exit the Quick Menu.

Hot Keys

When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the Control Panel Keys.

Key	Description
1 ★ + 2	Press and hold the keys to lock/unlock the OSD Menu. When the menu appears on the screen, continue holding both keys for 10 seconds to lock/unlock the OSD Menu If the OSD Menu is locked, the below message will appear on the screen:
1 ★ + 4	Press and hold the keys to lock/unlock the Power button. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the Power button. If the Power button is locked, the below message will appear on the screen.
3 + 4	Press and hold the keys to display/hide the boot up screen when the device is turned on.

Configuring the Settings

General Operations

Press the 2 / 3 / 4 key to display the On-Screen Display (OSD) Menu.

Press the 1 ★ or 2 key to select the main menu. Then press the 3 key to enter the selected menu.

Press the 1 ★ or 2 key to select the desired menu option. Then press the 3 key to enter the sub-menu.

Press the 1 ★ or 2 key to adjust/select the setting. Then press the 3 key to confirm.

Note: Certain menu option adjustments do not require the user to press the 3 key to confirm the selection. Follow the key guide that appears on the screen to select the option or make adjustments.

Press the 4 key to return to the previous menu.

Note: To exit the OSD menu, Press the 5

key.

Appendix

Product Specifications

Item	Category	Specifications
LCD	Type	VA, Color a-Si TFT Active Matrix 3840 x 2160 (UHD) LCD; 0.18159 (H)mm x 0.18159 (V)mm pixel pitch
	Display Size	80 cm
	Display Size	31.5”
	Color Filter	RGB Vertical Stripe
	Glass Surface	Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal	Video Sync	TMDS digital (100 Ω) HDMI (v. 2.0): f_h: 15~140 kHz, f_v: 24~60 Hz DisplayPort (v. 1.4): f_h: 24~140 kHz, f_v: 48~60 Hz
Compatibility	PC	up to 3840 x 2160
Compatibility	Macintosh	up to 3840 x 2160
Resolution and Timings^[1]	Recommended	3840 x 2160 @ 60 Hz
Resolution and Timings^[1]	Supported	3840 x 2160 @ 24, 25, 30, 50, 60 Hz 3840 x 1080 @ 60 Hz 3440 x 1440 @ 60 Hz 2560 x 1440 @ 60, 75 Hz 2560 x 1080 @ 24, 25, 30, 50, 60 Hz 2048 x 1152 @ 60 Hz 1920 x 1440 @ 51, 60, 75 Hz 1920 x 1200 @ 60, 75 Hz 1920 x 1080 @ 24, 25, 30, 50, 60 Hz 1680 x 1050 @ 60 Hz 1600 x 1200 @ 60 Hz 1600 x 900 @ 60 Hz 1440 x 900 @ 60, 75 Hz 1440 x 576 @ 50 Hz 1400 x 1050 @ 60, 75 Hz 1366 x 768 @ 60 Hz 1360 x 768 @ 60 Hz 1280 x 1024 @ 50, 60, 75 Hz 1280 x 960 @ 50, 60, 75 Hz 1280 x 800 @ 60, 75 Hz 1280 x 768 @ 50, 60, 75 Hz 1280 x 720 @ 50, 60 Hz 1152 x 900 @ 66 Hz 1152 x 870 @ 75 Hz 1152 x 864 @ 60, 75 Hz 1024 x 768 @ 50, 60, 70, 72, 75 Hz 1024 x 600 @ 60 Hz 848 x 480 @ 60 Hz 832 x 624 @ 75 Hz 800 x 600 @ 56, 60, 72, 75 Hz 720 x 576 @ 50 Hz 720 x 480 @ 60 Hz 720 x 400 @ 70 Hz 640 x 480 @ 60, 67, 73, 75 Hz 640 x 400 @ 60, 70 Hz 640 x 350 @ 70 Hz
Power^[2]	Input Voltage	AC 100-240V, 50/60 Hz (auto switch)
Display Area	Active Size (H x V)	697.31 x 392.23 mm
Display Area	Active Size (H x V)	27.45” x 15.44”
Operating Conditons	Altitude	5 km
	Altitude	16,404.2 ft
	Relative Humidity	20% to 90% (non-condensing)
	Temperature	0° C to 40° C
	Temperature	32° F to 104° F
Storage Conditions	Altitude	12 km
	Altitude	39,370.1 ft
	Relative Humidity	5% to 90% (non-condensing)
	Temperature	-20° C to 60° C
	Temperature	-4° F to 140° F
Dimensions (with stand)	Physical (W x H x D)	714.3 x 546 x 213 mm
Dimensions (with stand)	Physical (W x H x D)	28.1” x 21.5” x 8.4”
Weight (with stand)	Physical	7.9 kg
Weight (with stand)	Physical	17.4 lb
Wall Mount	Dimensions	100 x 100 mm
Power Consumption	On^[3]	185W (Typical) without audio
	Standby/Sleep	< 0.5W
	Off	< 0.3W (Maximum)

↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
↑ Please use the power adapter from ViewSonic® or an authorized source only.
↑ The test condition follows EEI standards.

On-Screen Display (OSD) Menu Tree

Sub-menu
HDMI 1
HDMI 2
DisplayPort

Sub-menu	Menu Option
Volume	(-/+, 0~100)
Mute	On
Mute	Off

Sub-menu
Standard
Game
Movie
Web
Text
MAC
Mono

Sub-menu	Menu Option
Contrast/Brightness	Contrast	(-/+, 0~100)
Contrast/Brightness	Brightness	(-/+, 0~100)
Color Temperature	sRGB
	Bluish
	Cool
	Native
	Warm
	User Color	Red	(-/+, 0~100)
		Green	(-/+, 0~100)
		Blue	(-/+, 0~100)
Color Space	Auto
	RGB
	YUV
Color Range	Auto
	Full Range
	Limited Range
HDR	Auto
HDR	Off

Sub-menu	Menu Option
Sharpness	(-/+, 0/25/50/75/100)
Blue Light Filter	(-/+, 0~100)
Aspect Ratio	4:3
	5:4
	16:9
	16:10
Overscan	On
Overscan	Off
Black Stabilization	(-/+, 0/10/20/30/40/50/60/70/80/90/100)
Advanced DCR	(-/+, 0/25/50/75/100)
Response Time	Standard
	Advanced
	Ultra Fast

Sub-menu	Menu Option
Language	English
	Français
	Deutsch
	Español
	Italiano
	Suomi
	Русский
	Türkçe
	Česká
	Tiếng Việt
	日本語
	한국어
	繁體中文
	简体中文
Information
OSD Size	Native
OSD Size	Large
OSD Timeout	(-/+, 5/15/30/60)
OSD Background	On
OSD Background	Off
Power Indicator	On
Power Indicator	Off
Auto Power Off	On
Auto Power Off	Off
Sleep	30 minutes
	45 minutes
	60 minutes
	120 minutes
	Off
ECO Mode	Standard
	Optimize
	Conserve
Auto Detect	On
Auto Detect	Off
DDC/CI	On
DDC/CI	Off
Memory Recall

VG3208-4K_UG_ENG_1a_20240830

[1] Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.

[2] Please use the power adapter from ViewSonic® or an authorized source only.

[3] The test condition follows EEI standards.

[1]

[2]

[3]