• Print Print

VPC37 Making Connections

From ViewSonic Documentation
Revision as of 05:40, 3 July 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC37_Introduction |2=VPC37_Initial_Setup |3=VPC37_Making_Connections |4=VPC37_Using_the_Device |5=VPC37_Appendix |6=VPC37_Regulatory_and_Service_Information }} </noinclude> =Network Connection= To connect to the Internet or a network, connect one end of a RJ45 cable to the '''RJ45''' port of the VPC35, then connect the other end to your network. <div class="res-img">500px</div> =USB Connection=...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VPC37 Making Connections
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Network Connection

To connect to the Internet or a network, connect one end of a RJ45 cable to the RJ45 port of the VPC35, then connect the other end to your network.

USB Connection

USB peripherals such as keyboards, mice, storage devices, etc. can be connected to the VPC37’s USB ports.

Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC37_Making_Connections&oldid=28812"