• Print Print

VPC33 Initial Setup

From ViewSonic Documentation
Revision as of 03:27, 3 July 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC33_Introduction |2=VPC33_Initial_Setup |3=VPC33_Making_Connections |4=VPC33_Using_the_Device |5=VPC33_Appendix |6=VPC33_Regulatory_and_Service_Information }} </noinclude> =Installing the VPC33= <ol><li>Remove the slot-in PC cover of the display.</li> <div class="res-img">600px</div> <li>Carefully insert the VPC33 into the PC slot of the display.</li> <div class="res-img">File:VPC33_Initial_Se...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VPC33 Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Installing the VPC33

  1. Remove the slot-in PC cover of the display.
  2. Carefully insert the VPC33 into the PC slot of the display.
  3. Secure the VPC33 to the display with the two (2) screws.
    4. NOTE: Please note that the three (3) antennas must be installed on the VPC33.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC33_Initial_Setup&oldid=28786"