IFP6552-2 Introduction

Package Contents

NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

AAA Battery Camera Plate Clamp x 5 Compliance Statement HDMI Cable (3 m) Power Cord (3 m) Quick Start Guide Remote Control RS-232 Adapter Screw x 8 Touch Pen x 2 USB Touch Cable (3 m)

Wall Mount Kit Specifications (VESA)

Please follow the instructions in the wall mount installation guide to install your wall mount or mobile mount bracket. If attaching to other building materials, please contact your nearest dealer.

Model	VESA Spec. (A x B)	Standard Screw (C x D)	Screw Quantity
IFP6552-2	500 x 400 mm	M8 x 25 mm	4

Do not use screws that are longer than the standard dimension, as they may cause damage to the inside of the display.

Product Overview

Front Panel

Rear Panel

Control Panel

Number	Description
1	Ambient light sensor
2	Remote control receiver
3	Power indicator light Press to turn ON the device Press to turn OFF/ON the display backlight only Press and hold to turn OFF the device
4	Return to the ViewBoard's main interface
5	Return to the ViewBoard's previous level
6	Disable/Enable the touch screen
7	Freeze the current image on the screen
8	Decrease the volume level
9	Increase the volume level

I/O Panels

Front I/O

Number	Port	Description
1	Type C(Type C 2)	USB Type C input USB 3.0 standard Supports DP v. 1.2 with audio, video, and touch Supports LAN by 10M/100M Supports power charge up to 65W. Power charge supported: 5V/3A, 9V/3A, 15V/3A, 20V/3.25A
2	HDMI(HDMI 3)	HDMI input Connect to a computer with HDMI output, set-top box, or other video device Supports 4K display; HDMI v. 2.0; CEC
3	TOUCH(TOUCH 3)	USB Type B Touch signal output to external computer After connection (with an external computer), the device connected to the USB port can directly be used by the external computer NOTE: Pairs with the HDMI 3 port next to it.
4	USB	USB Type A input USB 3.0 standard Connect USB devices such as hard disks, keyboard, mouse, etc. Automatically switches between the external computer and ViewBoard

Rear I/O

Side I/O

Further Reading