• Print Print

VA2233-H 100Hz Connecting Power and Devices

From ViewSonic Documentation
Revision as of 10:17, 7 July 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=VA2233-H_100Hz_Introduction |2=VA2233-H_100Hz_Initial_Setup |3=VA2233-H_100Hz_Connecting_Power_and_Devices |4=VA2233-H_100Hz_Adjusting_the_Viewing_Angle |5=VA2233-H_100Hz_Quick_Menu |6=VA2233-H_100Hz_Hot_Keys |7=VA2233-H_100Hz_On-Screen_Display_Menu |8=VA2233-H_100Hz_On-Screen_Display_Menu_Tree |9=VA2233-H_100Hz_Specifications |10=VA2233-H_100Hz_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= <ol><li>Conne...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VA2233-H 100Hz Connecting Power and Devices
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Connecting to Power

  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Plug the power cord plug into a power outlet.

Connecting External Devices

Retrieved from "https://manuals.viewsonic.com/index.php?title=VA2233-H_100Hz_Connecting_Power_and_Devices&oldid=29018"