• Print Print

VG2709-2K-MHD Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
VY (talk | contribs)
7,615 edits
No edit summary
VY (talk | contribs)
7,615 edits
No edit summary
 
Line 58: Line 58:
|keywords=VG2709-2K-MHD, stand installation, wall mounting, VESA  
|keywords=VG2709-2K-MHD, stand installation, wall mounting, VESA  
|description=How to install and uninstall the stand on the VG2709-2K-MHD monitor.  
|description=How to install and uninstall the stand on the VG2709-2K-MHD monitor.  
}}
[[Category:<noinclude>
{{Sticky_Menu_Monitor_2.1
|1=VG2709-2K-MHD-2_Introduction
|2=VG2709-2K-MHD-2_Initial_Setup
|3=VG2709-2K-MHD-2_Connecting_Power_and_Devices
|4=VG2709-2K-MHD-2_Adjusting_the_Viewing_Angle
|5=VG2709-2K-MHD-2_Quick_Menu
|6=VG2709-2K-MHD-2_Hot_Keys
|7=VG2709-2K-MHD-2_On-Screen_Display_Menu
|8=VG2709-2K-MHD-2_On-Screen_Display_Menu_Tree
|9=VG2709-2K-MHD-2_Specifications
|10=VG2709-2K-MHD-2_Regulatory_and_Service_Information
}}
</noinclude> __NOTOC__
=Stand Installation=
<div><ol>
<li style="display: inline-block;"> [[File:VG2709-2K-MHD_Install_1.PNG|330px|Align the points]]</li>
<li style="display: inline-block;"> [[File:VG2709-2K-MHD_Install_2.PNG|280px|Secure the Base and Neck]]</li>
<li style="display: inline-block;"> [[File:VG2709-2K-MHD_Install_3.PNG|230px|Lift into an upright position]]</li>
</ol></div>
<br>
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}}
=Wall Mounting=
{{Note-yellow|Only use UL Certified wall mount kits.}}
<div class="res-img">[[File:VG2709-2K-MHD_Wall_Mount_1.PNG|400px|link=]]</div>
Refer to the table below for the standard dimensions for wall mount kits.
{| class="wikitable" style="text-align: center;" width=70%
! style="background-color:#DB0025; color:#ffffff;" | Maximum Loading
! style="background-color:#DB0025; color:#ffffff;" | Hole Pattern<br /> (W x H)
! style="background-color:#DB0025; color:#ffffff;" | Interface Pad<br /> (W x H x D)
! style="background-color:#DB0025; color:#ffffff;" | Pad Hole
! style="background-color:#DB0025; color:#ffffff;" | Screw Specification & Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm - 4 pieces
|}
{{Note-yellow|Wall mount kits are sold separately. To obtain a wall mounting kit, contact ViewSonic® or your local dealer.}}
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Remove the monitor stand.</li>
<div><ul>
<li style="display: inline-block;">[[File:VG2709-2K-MHD_Wall_Mount_2.PNG|300px|Disengage the hooks]]</li>
</div></ul>
<li> Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm).</li>
<li> Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol>
<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude>
{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VG2709-2K-MHD-2, stand installation, wall mounting, VESA
|description=How to install and uninstall the stand on the VG2709-2K-MHD-2 monitor.
}}
}}


[[Category:VG2709-2K-MHD]]
[[Category:VG2709-2K-MHD]]

Latest revision as of 09:08, 10 July 2024

VG2709-2K-MHD Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Stand Installation

  1. Align the points
  2. Secure the Base and Neck
  3. Lift into an upright position


Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Only use UL Certified wall mount kits.

Refer to the table below for the standard dimensions for wall mount kits.

Maximum Loading Hole Pattern
(W x H) 		Interface Pad
(W x H x D) 		Pad Hole Screw Specification & Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
Wall mount kits are sold separately. To obtain a wall mounting kit, contact ViewSonic® or your local dealer.
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Remove the monitor stand.
    • Disengage the hooks
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the device. Then secure it with four (4) screws (M4 x 10 mm).
  5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

Using the Security Slot

Retrieved from "https://manuals.viewsonic.com/index.php?title=VG2709-2K-MHD_Initial_Setup&oldid=42520"