• Print Print

VPC33 Using the Device: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC33_Introduction |2=VPC33_Initial_Setup |3=VPC33_Making_Connections |4=VPC33_Using_the_Device |5=VPC33_Appendix |6=VPC33_Regulatory_and_Service_Information }} </noinclude> =Selecting an Input Source= ==IFP Series== <div class="res-img">500px</div> To select an input source: <ol><li>Press '''INPUT''' on the remote control, press the setting button on the front panel, or press the Settings icon fro..."
 
Line 27: Line 27:
<li>Press '''EPG/BACK''' on the remote control to exit.</li>
<li>Press '''EPG/BACK''' on the remote control to exit.</li>
:'''NOTE:''' The above image is for reference only and is subject to change without notice.</ol>
:'''NOTE:''' The above image is for reference only and is subject to change without notice.</ol>
==IFPG1 Series==
<div class="res-img">[[File:VPC-A31-O1_Input_IFPG1.png|250px]]</div>
To select an input source:
<ol><li>Press '''INPUT''' on the front panel.</li>
<li>In the OSD Menu, touch '''INPUT'''.</li>
<li>Touch the PC input source directly.</li>
<li>Touch a blank area outside of the menu to exit.</li>
:'''NOTE:''' The above image is for reference only and is subject to change without notice.</ol>




Revision as of 03:35, 3 July 2023

VPC33 Using the Device
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Selecting an Input Source

IFP Series

To select an input source:

  1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
  2. Press ▼/▲/◄/► on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control, or touch the input source directly.
  4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

CDE Series

To select an input source:

  1. Press INPUT on the remote control.
  2. Press ▼/▲ on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control.
  4. Press EPG/BACK on the remote control to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC33_Using_the_Device&oldid=28793"