Revision as of 09:06, 5 January 2022

PD1631 PD1631T Making Connections

Introduction

Making Connections

Adjusting the Viewing Angle

Using the Display

Setting the Display Area

Pen Input Area Mapping

Specifications

Regulatory and Service Information

Safety Precautions

Troubleshooting

Maintenance

Installing Drivers and Software

System Requirements:
Operating system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above
Video Input: HDMI/VGA

Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at:
http://www.viewsonicglobal.com/q/PD1631

Pen Display Driver

Pen Display Manager can be used to map the active area and adjust the feel of the pen.

Open the ViewSign Console installation file and install the driver.
After the installation completes, you will need to restart the computer.

NOTE: For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software

Connecting to Power

Connect the power cord to the power adapter.
Connect the power adapter to the DC IN jack at the rear of the display.
Connect the power cord to a power outlet.

Connecting External Devices

HDMI Connection
VGA Connection
Audio Connection
USB Connection

HDMI

Connect one end of an HDMI cable to the HDMI port of the display. Then connect the other end of the cable to the HDMI port of your computer.

VGA

Audio

USB

Touch Function Control (PD1631T only)

@@ Line 43: / Line 43: @@
 </gallery>
 ===HDMI===
+Connect one end of an HDMI cable to the HDMI port of the display. Then connect the other end of the cable to the HDMI port of your computer.
 ===VGA===

PD1631 PD1631T Making Connections: Difference between revisions