• Print Print

PD1631 PD1631T Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 29: Line 29:
:::<small>'''NOTE:''' For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software</small>
:::<small>'''NOTE:''' For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software</small>


=Connecting the Pen Display=
=Connecting to Power=
<ol><li>Turn the device over so the bottom side is facing up.</li>
# Connect the power cord to the power adapter.
<div class="res-img">[[File:PD1233_PD1233T_Connection_1.png|400px]]</div>
# Connect the power adapter to the DC IN jack at the rear of the display.
<li>Connect the Mini HDMI end of the Mini HDMI 3 in 1 cable to the ''Mini HDMI Port'' of the device.</li>
# Connect the power cord to a power outlet.
<div class="res-img">[[File:PD1233_PD1233T_Connection_2.png|300px]]</div>
 
<li>Connect the Main USB A cable and HDMI cable to the PC. The Secondary USB A cable can be connected to a fully powered USB port on the computer, or to an AC outlet using the supplied power adapter.</li>
=Connecting External Devices=
<div class="res-img">[[File:PD1233_PD1233T_Connection_3.png|400px]]</div></ol>
===HDMI Connection===
:::<small>'''NOTE:''' When connecting the USB cable directly to the computer, the screen of the tablet may flicker if the computer power is insufficient. In this case, please connect the Secondary USB A cable (shown in red) to the power adapter and plug the adapter into an AC outlet to ensure that there is enough power for the pen display.</small>
 
 
===VGA Connection===
 
 
===Audio Connection===
 
 
===USB Connection===
 
 
=Touch Function Control (PD1631T only)=
 
 
 


{{#seo:
{{#seo:

Revision as of 08:59, 5 January 2022

PD1631 PD1631T Making Connections
Introduction
Making Connections
Adjusting the Viewing Angle
Using the Display
Setting the Display Area
Pen Input Area Mapping
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Installing Drivers and Software

System Requirements:
Operating system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above
Video Input: HDMI/VGA

Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at:
http://www.viewsonicglobal.com/q/PD1631

Pen Display Driver

Pen Display Manager can be used to map the active area and adjust the feel of the pen.

  1. Open the ViewSign Console installation file and install the driver.
  2. After the installation completes, you will need to restart the computer.
NOTE: For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software

Connecting to Power

  1. Connect the power cord to the power adapter.
  2. Connect the power adapter to the DC IN jack at the rear of the display.
  3. Connect the power cord to a power outlet.

Connecting External Devices

HDMI Connection

VGA Connection

Audio Connection

USB Connection

Touch Function Control (PD1631T only)

Retrieved from "https://manuals.viewsonic.com/index.php?title=PD1631_PD1631T_Making_Connections&oldid=16928"