• Print Print

PD1631 PD1631T Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> __NOTOC__ {{Sticky_Menu_Pen_Display |1=PD1233_PD1233T_Introduction |2=PD1233_PD1233T_Making_Connections |3=PD1233_PD1233T_Adjusting_the_Viewing_Angle |4=PD1233_PD1..."
 
No edit summary
Line 1: Line 1:
<noinclude> __NOTOC__
<noinclude> __NOTOC__
{{Sticky_Menu_Pen_Display
{{Sticky_Menu_Pen_Display
|1=PD1233_PD1233T_Introduction
|1=PD1631_PD1631T_Introduction
|2=PD1233_PD1233T_Making_Connections
|2=PD1631_PD1631T_Making_Connections
|3=PD1233_PD1233T_Adjusting_the_Viewing_Angle
|3=PD1631_PD1631T_Adjusting_the_Viewing_Angle
|4=PD1233_PD1233T_Using_the_Display
|4=PD1631_PD1631T_Using_the_Display
|5=PD1233_PD1233T_Setting_the_Display_Area
|5=PD1631_PD1631T_Setting_the_Display_Area
|6=PD1233_PD1233T_Pen_Input_Area_Mapping
|6=PD1631_PD1631T_Pen_Input_Area_Mapping
|7=PD1233_PD1233T_Specifications
|7=PD1631_PD1631T_Specifications
|8=PD1233_PD1233T_Regulatory_and_Service_Information
|8=PD1631_PD1631T_Regulatory_and_Service_Information
}}
}}
</noinclude>
</noinclude>

Revision as of 08:54, 5 January 2022

PD1631 PD1631T Making Connections
Introduction
Making Connections
Adjusting the Viewing Angle
Using the Display
Setting the Display Area
Pen Input Area Mapping
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Installing Drivers and Software

System Requirements:
Operating system: Windows XP/7/8/10 (32/64 bit)
PC I/O: USB 2.0/above
Video Input: HDMI

Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at:
http://www.viewsonicglobal.com/q/PD1233

DisplayLink Driver

Open the DisplayLink installation file and install the driver.

NOTE: DisplayLink Driver can be installed through Windows Update.

Pen Display Driver

Pen Display Manager can be used to map the active area and adjust the feel of the pen.

  1. Open the ViewSign Console installation file and install the driver.
  2. After the installation completes, you will need to restart the computer.
NOTE: For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software

Connecting the Pen Display

  1. Turn the device over so the bottom side is facing up.
  2. Connect the Mini HDMI end of the Mini HDMI 3 in 1 cable to the Mini HDMI Port of the device.
  3. Connect the Main USB A cable and HDMI cable to the PC. The Secondary USB A cable can be connected to a fully powered USB port on the computer, or to an AC outlet using the supplied power adapter.
NOTE: When connecting the USB cable directly to the computer, the screen of the tablet may flicker if the computer power is insufficient. In this case, please connect the Secondary USB A cable (shown in red) to the power adapter and plug the adapter into an AC outlet to ensure that there is enough power for the pen display.
Retrieved from "https://manuals.viewsonic.com/index.php?title=PD1631_PD1631T_Making_Connections&oldid=16923"