PD0511 Making Connections

Installing Drivers and Software

System Requirements:
Operating system: Windows 7, 10, 11, or later; Linux Ubuntu; Chrome OS by request.
PC I/O: USB 2.0/above

Before connecting and using the pen display, it is necessary to install the below software. The software can be downloaded at:
PD0511 – Driver and Software Download

DisplayLink Driver

Open the DisplayLink installation file and install the driver.

NOTE: DisplayLink Driver can be installed through Windows Update when connected to the Internet.

Pen Display Driver

ViewSonic Pen Manager can be used to map the active area and adjust the feel of the pen.

1. Open the ViewSign Console installation file and install the driver (ViewSonic Pen Manager).
2. Restart the computer after the installation completes.

NOTE: For further ViewSign Console information, please visit: Pen Display Software - ViewSonic Pen Display Software

Connecting the Signature Pad

1. Turn the device over so the bottom side is facing up.

2. Connect the Micro USB end of the USB cable to the Micro USB Port on the device.

3. Connect the other end of the USB cable to a computer.