ViewBoard Troubleshooting

Troubleshooting Common Problems

General

Why doesn't the remote control work?

Solution 1 ► Check whether something is obstructing the display’s remote control receiver.

Solution 2 ► Check whether the batteries in the remote control are installed correctly.

Solution 3 ► Check whether the batteries need to be replaced.

Why is the ViewBoard turning off unexpectedly?

Solution 1 ► Check whether Sleep mode is enabled.

Solution 2 ► Check if there is a power outage in your area.

Solution 3 ► Turn on the display and see if the problem is with the signal and control system.

PC Mode

There is no signal from my PC.

Solution 1 ► Check the display settings.

Solution 2 ► Check the display resolution.

Solution 3 ► Adjust the Hs &Vs (synchronization) settings using the OSD menu.

Why is there line streaking in the background?

Solution 1 ► Choose auto adjust.

Solution 2 ► Adjust clock and phase.

The ViewBoard is displaying an inaccurate color.

Solution 1 ► Check the VGA connection.

Solution 2 ► Adjust the chroma, brightness, and contrast settings.

An "Unsupported Format" error is being shown.

Solution 1 ► Choose auto adjust.

Solution 2 ► Adjust clock and phase settings.

Touch Function

The touch function isn't responding.

Solution 1 ► Check that drivers are installed correctly.

Solution 2 ► Reinstall driver(s).

Solution 3 ► Check setup and align it.

Solution 4 ► Check whether the touch pen is working properly.

Video Not Working Properly

Why is there no picture and/or no sound?

Solution 1 ► Check the Power status.

Solution 2 ► Check the signal cable.

Solution 3 ► Check that the internal PC is installed correctly.

The picture is unclear and/or cutting in and out.

Solution 1 ► Check the signal cable.

Solution 2 ► Check if other electronics are interrupting the signal.

Why is the picture quality poor?

Solution 1 ► Adjust chroma, brightness, and contrast settings in the menu.

Solution 2 ► Check the signal cable.

Audio Not Working Properly

Why is there no sound?

Solution 1 ► Press the Mute/Unmute button.

Solution 2 ► Adjust the volume.

Solution 3 ► Check the audio cable.

Sound is only coming out from one speaker.

Solution 1 ► Adjust the sound balance in the menu.

Solution 2 ► Check the sound control panel settings of the computer.

Solution 3 ► Check the audio cable.
NOTE: SPDIF and Audio Out only work in the Embedded Player, HDMI, and DisplayPort (DP) channels.

Online Support Center