• Print Print

CDE4312 Introduction: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 97: Line 97:
|-
|-
| style="font-weight:bold;" | 1
| style="font-weight:bold;" | 1
| HDMI OUT
| AC IN
| style="text-align:left;" | Extend content out to another display device
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 2
| style="font-weight:bold;" | 2
| USB 3.0
| Audio Out
| style="text-align:left;" |  
| style="text-align:left;" |  
*USB Type A input
*Connect USB devices such as hard disks, keyboard, mouse, etc.
::<small>'''NOTE:''' </small>
|-
|-
| style="font-weight:bold;" | 3
| style="font-weight:bold;" | 3
| HDMI 1/2/3
| LAN
| style="text-align:left;" |  
| style="text-align:left;" |  
*High definition input
*Connect to a PC with HDMI output, set-top box, or other video device
::<small>'''NOTE:''' HDMI 1/2/3 supports HDMI CEC.</small>
|-
|-
| style="font-weight:bold;" | 4
| style="font-weight:bold;" | 4
| TOUCH
| SPDIF
| style="text-align:left;" | Touch signal output to external PC
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 5
| style="font-weight:bold;" | 5
| USB 2.0
| RS-232
| style="text-align:left;" | For ViewBoard firmware upgrade
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 6
| style="font-weight:bold;" | 6
| Power Switch
| Audio/Video
| style="text-align:left;" | Turn on/off AC power supply
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 7
| style="font-weight:bold;" | 7
| AC IN
| USB 2.0
| style="text-align:left;" | AC power input
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 8
| style="font-weight:bold;" | 8
| SPDIF
| USB Type-C
| style="text-align:left;" | SPDIF output
| style="text-align:left;" |  
|-
|-
| style="font-weight:bold;" | 9
| style="font-weight:bold;" | 9
| LAN
| HDMI 1
| style="text-align:left;" |  
| style="text-align:left;" |  
*Standard RJ45 (10M/100M/1G) internet
*For ViewBoard and Slot-in PC use
|-
|-
| style="font-weight:bold;" | 10
| style="font-weight:bold;" | 10
| RS-232
| HDMI 2 (ARC)
| style="text-align:left;" |  
| style="text-align:left;" |  
*Serial interface
*For mutual transfer of data between devices
|-
| style="font-weight:bold;" | 11
| VGA
| style="text-align:left;" | External PC image input
|-
| style="font-weight:bold;" | 12
| AUDIO IN
| style="text-align:left;" | External PC audio input
|-
| style="font-weight:bold;" | 13
| AUDIO OUT
| style="text-align:left;" | Audio out to an external speaker
|-
|-
|}
|}

Revision as of 03:45, 12 August 2022

CDE4312 Introduction
Introduction
Remote Control
Using Gestures
Connecting Devices
Using the ViewBoard
On-Screen Display Menu
ViewBoard Settings
Pre-installed Applications
RS-232 Protocols
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Package Contents

Package Contents
  1. HDMI Cable (1.8 m/5.9 ft)
  2. Power Cable (1.8 m/5.9 ft)
  3. Remote Control
  4. AAA Battery x 2
  5. Compliance Statement
  6. Quick Start Guide
  7. RS-232 Adapter
  8. Wall Mount Screw x 4
  9. LCD Display

Wall Mount Kit Specifications (VESA)

Please follow the instructions in the wall mount installation guide to install your wall mount or mobile mount bracket. If attaching to other building materials, please contact your nearest dealer.

Wall Mount Kit Specifications
Model VESA Spec. (A x B) Standard Screw (C x D) Quantity
CDE4312 200 x 200 mm M6 x 10 mm 4
Do not use screws that are longer than the standard dimension, as they may cause damage to the inside of the display.

Product Overview

Front Panel

CDE4312 Front Panel

Rear Panel

CDE4312 Rear Panel

Control Panel

CDE4312 Control Panel
Number Button Description
1 Power
  • Press to turn ON/OFF the display.
2 Volume
  • In the OSD menu, press the VOL+/VOL- key to adjust the value of the selected item.
  • Adjust the volume level.
3 Channel
  • Press the SOURCE key to enter the input source menu, and press CH+/CH- to select the signal source.
  • Press the CH+/CH- key to select an item in the OSD menu.
4 Source/Menu
  • Press the MENU key to enter the main menu.
  • Press the SOURCE key to confirm the operation under the OSD menu operations.
  • Confirm the operation in the input source menu.

I/O Panels

IFP62 I/O Panel
Number Port Description
1 AC IN
2 Audio Out
3 LAN
4 SPDIF
5 RS-232
6 Audio/Video
7 USB 2.0
8 USB Type-C
9 HDMI 1
10 HDMI 2 (ARC)


Further Reading

Retrieved from "https://manuals.viewsonic.com/index.php?title=CDE4312_Introduction&oldid=20818"