ID0730 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> __NOTOC__ {{Sticky_Menu_ViewBoard_Notepad |1=ID0730_Introduction |2=ID0730_Making_Connections |3=ID0730_Using_the_Driver |4=ID0730_Specifications |5=ID0730_Regulat..."
 
No edit summary
Line 8: Line 8:
}}
}}
</noinclude>
</noinclude>
=Connecting the Pen Display=
=Attaching the Notebook=
<ol><li>Turn the device over so the bottom side is facing up.</li>
<ol><li>Turn the Notebook over so the bottom side is facing up.</li>
<div class="res-img">[[File:PD0711_Connection_1.png|400px]]</div>
<div class="res-img">[[File:ID0730_Connection_1.png|400px]]</div>
<li>Plug the USB Type A end of the USB cable into the ''USB Port'' on the device.</li>
<li>It is recommended to apply the double-sided tape to the bottom of the Notebook in the designated area.</li>
<div class="res-img">[[File:PD0711_Connection_2.png|300px]]</div>
<div class="res-img">[[File:ID0730_Connection_2.png|300px]]</div>
<li>Connect the Main USB A cable to the computer. The Secondary USB A cable can be connected to a fully powered USB port on the computer.</li>
<li>Turn over the Notebook and attach it within the four corner frame of the Digital Writing Pad.</li>
<div class="res-img">[[File:PD0711_Connection_3.png|500px]]</div></ol>
<div class="res-img">[[File:ID0730_Connection_3.png|500px]]</div></ol>
 


{{#seo:
{{#seo:

Revision as of 09:37, 22 April 2022

Attaching the Notebook

  1. Turn the Notebook over so the bottom side is facing up.
  2. It is recommended to apply the double-sided tape to the bottom of the Notebook in the designated area.
  3. Turn over the Notebook and attach it within the four corner frame of the Digital Writing Pad.