• Print Print

PD0511 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
No edit summary
No edit summary
Line 1: Line 1:
<noinclude> __NOTOC__
<noinclude> __NOTOC__
{{Sticky_Menu_Pen_Display
{{Sticky_Menu_Pen_Display_No_Adj
|1=PD0511_Introduction
|1=PD0511_Introduction
|2=PD0511_Making_Connections
|2=PD0511_Making_Connections
|3=PD0511_Adjusting_the_Viewing_Angle
|3=PD0511_Using_the_Display
|4=PD0511_Using_the_Display
|4=PD0511_Setting_the_Display_Area
|5=PD0511_Setting_the_Display_Area
|5=PD0511_Pen_Input_Area_Mapping
|6=PD0511_Pen_Input_Area_Mapping
|6=PD0511_Specifications
|7=PD0511_Specifications
|7=PD0511_Regulatory_and_Service_Information
|8=PD0511_Regulatory_and_Service_Information
}}
}}
</noinclude>
</noinclude>

Revision as of 07:56, 13 September 2021

PD0511 Making Connections
Introduction
Making Connections
Using the Display
Setting the Display Area
Pen Input Area Mapping
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Installing Drivers and Software

System Requirements:
Operating system: Windows XP/7/8/10 (32/64 bit) PC I/O: USB 2.0/above

Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at:
http://www.viewsonicglobal.com/q/PD0511

DisplayLink Driver

Open the DisplayLink installation file and install the driver.

NOTE: DisplayLink Driver can be installed through Windows Update.

Pen Display Driver

  1. Open the ViewSign Console installation file and install the driver.
  2. After the installation completes, you will need to restart the computer.
NOTE: For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software

Connecting the Signature Pad

  1. Turn the device over so the bottom side is facing up.
  2. Connect the Micro USB end of the USB cable to the Micro USB Port on the device.
  3. Connect the other end of the USB cable to a computer.
Retrieved from "https://manuals.viewsonic.com/index.php?title=PD0511_Making_Connections&oldid=14799"