Monitor Safety Precautions: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
No edit summary
No edit summary
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
__NOTOC__
{{Monitor_Safety_Precautions}}
=Using the Monitor Safely=
Please read the following Safety Precautions before you start using the device.
*Keep this user guide in a safe place for later reference.
*Read all warnings and follow all instructions.
*Sit at least 18" (45 cm) away from the device.
*Allow at least 4" (10 cm) clearance around the device to ensure proper ventilation.
*Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
*Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
*Avoid exposing the device to direct sunlight or other sources of sustained heat.
*Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.
*Use a soft, dry cloth to clean the external housing. For more information, refer to the [[Monitor_Maintenance|Maintenance]] section.
*Oil may collect on the screen as you touch it. To clean the greasy spots on the screen, refer to the [[Monitor_Maintenance|Maintenance]] section.
*Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.
*When moving the device, be careful not to drop or bump the device on anything.
*Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.
*Do not place any heavy objects on the device or connection cables.
*If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.
*Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.
*When connecting to a power outlet, DO NOT remove the grounding prong. Please ensure grounding prongs are NEVER REMOVED.
*Protect the power cord from being treaded upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.
*Only use attachments/accessories specified by the manufacturer.
<div class="res-img">[[File:Cart_Safety.png|right|80px]]</div>
*When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.
*Disconnect the power plug from the AC outlet if the device is not being used for a long period of time.
*Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:
:*if the power supply cord or plug is damaged
:*if liquid is spilled onto or objects fall in the unit
:*if the unit is exposed to moisture
:*if the unit does not operate normally or has been dropped
*NOTICE: LISTENING THROUGH EAR-/HEADPHONES AT A HIGH VOLUME FOR EXTENDED PERIODS CAN CAUSE HEARING DAMAGE/HEARING LOSS. When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.
*NOTICE: THE MONITOR MAY OVERHEAT AND SHUTDOWN! If the device shuts down automatically, please turn on your monitor again. After rebooting, change your monitor's resolution and refresh rate. For details, please refer to the graphics card's user guide.


{{#seo:
{{#seo:
|title=ViewSonic Monitor Safety Precautions
|title=ViewSonic Monitor Safety Precautions
|title_mode=append
|title_mode=append
|keywords=ViewSonic, Monitor, Display, VP  Series, VX Series, VG Series, XG Series, VA Series, Safety Precautions, Caution, Safe handling, care
|keywords=ViewSonic, monitor, LCD displays, safety precautions
|description=Take care and review the safety precautions for monitors before use.
|description=ViewSonic Monitor Safety Precautions.
}}
}}


[[Category:Monitor]]
[[Category:Monitor]]
{{#tweekihide:sidebar-right}}
{{#tweekihide:subnav}}

Latest revision as of 07:36, 31 December 2025

Read these instructions carefully, keep them in a safe place, and follow all warnings and instructions. If the monitor is going to be retained and relocated, the same considerations as below should be applied.

General Safety Precautions

  • Adjustment of the monitor’s volume may increase the headphone’s output voltage and, therefore, the sound volume level.
  • The factors influencing the headphones output other than those specified by the manufacturer (e.g., operating system, equalizer software, firmware, driver) may increase the headphone’s output voltage and, therefore, the sound volume level.
  • Excessive sound volume from headphones may cause hearing damage or loss.
  • Avoid touching or pressing on the screen as it may cause permanent damage or transfer skin oils.
  • Keep the monitor out of the reach of children and pets.

Power Cord Safety

  • Do not compress the power cord, particularly at the plug and at the point where it connects to the monitor.
  • Do not use the monitor if the power cord or plug is damaged.
  • The power cord is designed with a grounding prong to ensure safe operation. Do not remove or damage the grounding prong.
  • Only use the original power cord and do not use damaged or modified cords.

Handling

  • Only use attachments and accessories specifically designed and approved by the manufacturer to ensure compatibility and safety.
  • Only use with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the monitor.
  • When a cart is used, use it with caution when moving the cart and monitor to avoid injury from overturning.
  • When moving the monitor, handle it with care to avoid damage or injury.
  • Clean the monitor with a soft, dry cloth. For more thorough cleaning guidelines, see the “Maintenance” section in this guide.

Usage

  • Sit at least 45 cm (18 in.) from the monitor.
  • Do not place the monitor where children are likely to be present.
  • Educate children about the dangers of climbing on furniture to reach the monitor or related equipment.

Installation

  • Confirm the power distribution system of the installation location. The system should provide a circuit breaker rated at 120/240V, 20A.
  • Leave at least 10 cm (4 in.) of open space around the monitor to ensure proper ventilation.
  • Follow the manufacturer’s recommended installation guidelines to ensure safe and optimal operation.
  • Do not place the monitor in an unstable location, on tall furniture, or overhang the edge of supporting furniture.
  • Do not place the monitor on cloth or other materials that may be located between the product and supporting furniture.
  • Place the monitor in a well-ventilated area. Do not place anything on the display that prevents heat dissipation.
  • Do not place heavy objects on the monitor, video cable, or power cord.
  • Keep the area around the monitor free from items that might tempt children to climb, such as toys and remote controls, on the top of the monitor or furniture on which the product is placed.
  • Do not use the monitor near open flames, sparks, or hot surfaces.
  • Do not use the monitor near water or in humid conditions and avoid exposing it to rain or moisture.
  • Do not expose the monitor to direct sunlight or other sources of sustained heat.
  • Always route and manage cables connected to your monitor to prevent tripping, pulling, or grabbing.

Stability Hazard

  • To prevent the monitor from falling, potentially causing personal injury or death, secure the monitor to a wall or fixed object using cordage or other restraining devices.
  • The restraining device or cordage should be able to withstand a force of 100N and be tight without any slack.
  • The back of the monitor should face the wall to ensure the monitor cannot tilt under external force.
  • Make sure the monitor does not tilt under external force at any height or rotation angle.

Troubleshooting

  • If smoke appears, an abnormal noise, or a strange odor is present, immediately turn the monitor off and contact your dealer or ViewSonic. It is dangerous to continue using the monitor.
  • Unplug the monitor when it will be unused for long periods of time.
  • Refer all servicing to qualified service personnel. Service will be required when the monitor has been damaged in any way, such as: if the power cord or plug is damaged, if liquid is spilled onto or objects fall into the monitor, if the monitor is exposed to rain or moisture, or if the monitor does not operate normally or has been dropped.

Blue Light Filter and Eye Health

The monitor’s blue-light blocking technology helps reduce eye strain by minimizing blue-light emission, while maintaining the correct color balance, and eliminating screen flicks.

Below are some tips to help reduce the effect of eye strain:

  • Take a five-minute break every one to two hours.
  • Look away from the screen and gaze at distant objects when taking breaks.
  • Do eye and neck exercises.
    • Eye exercises: Gently move your eyes to the left, right, up, and down.
    • Neck exercises: Gently stretch your neck by leaning forward, turning your head side to side.