Latest revision as of 07:19, 27 March 2026

TD2223-2 Connecting Power and Devices

Introduction

Initial Setup

Connecting Power and Devices

Adjusting the Viewing Angle

Quick Menu

Hot Keys

On-Screen Display Menu Operation

On-Screen Display Menu Tree

Specifications

Regulatory and Service Information

Safety Precautions

Glossary

Troubleshooting

Maintenance

Connecting to Power

Connect the power cord to the AC IN jack at the rear of the device.
Plug the power cord plug into a power outlet.

Connecting External Devices

HDMI

Connect one end of an HDMI cable to the HDMI port of the monitor. Then connect the other end of the cable to the HDMI port of your computer.

Note: The monitor is equipped with one HDMI 1.4 port.

DVI

Connect one end of a DVI cable to the DVI port of the monitor. Then connect the other end of the cable to the DVI port of your computer.

VGA

Connect one end of a VGA cable to the VGA port of the monitor. Then connect the other end of the cable to the VGA port of your computer.

Audio

Plug an audio cable into the Audio In/Audio Out port of the monitor. Plug the other end into your computer (Audio In) or ear-/headphones (Audio Out).

Note: The monitor is also equipped with dual speakers.

USB

Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.

The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines:

USB	Number	Description
Type A	Two (2)	Connection for your Type A peripheral device(s) (e.g., storage device, mouse, keyboard, etc.).
Type B	One (1)	Connect the USB Type B male cable (square with 2 cut corners) to this port, and then connect the other end of the cable to the USB downstream port of your computer.

Note: To activate the USB Type A port, ensure your computer is also connected to the monitor’s USB Type B port.

Touch Function Control

Before using the touch function, ensure the USB Type B to Type A cable is connected to your computer and the Windows operating system is running.

When using the touch function, please note:

The touch function may need about five (5) seconds to resume if the USB cable is removed and plugged in again, or the computer resumes from Sleep Mode.
The touchscreen can only detect up to ten (10) fingers simultaneously.
If the Windows’ cursor does not accurately follow your finger when you touch the screen, do the following:

Open: Control Panel > Hardware and Sound > Tablet PC Settings
Select Calibration.
Follow the instructions to recalibrate your screen.

Touch Accuracy

Touch accuracy is ± 2 mm over 90% of the touch active area located in the middle area.
Touch size at 10% of the edge area is ≥ 8 mm (as illustrated below); the area at the edges without might not support any touch.

Please use a spherical tip stylus with a minimum diameter of 3 mm in 90% of the touch active area.
Please use a spherical tip stylus with a minimum diameter of 8 mm in 10% of the edge area.

@@ Line 21: / Line 21: @@
 ==HDMI==
 Connect one end of an HDMI cable to the HDMI port of the monitor. Then connect the other end of the cable to the HDMI port of your computer.
-:'''NOTE:''' The monitor is equipped with one HDMI 1.4 port.
+{{Note| The monitor is equipped with one HDMI 1.4 port.}}
+<div class="res-img">[[File:TD2223-2_Connect_HDMI.png|400px|Connecting to HDMI]]</div>
 ==DVI==
 Connect one end of a DVI cable to the DVI port of the monitor. Then connect the other end of the cable to the DVI port of your computer.
+<div class="res-img">[[File:TD2223-2_Connect_DVI.png|400px|Connecting to DVI]]</div>
 ==VGA==
 Connect one end of a VGA cable to the VGA port of the monitor. Then connect the other end of the cable to the VGA port of your computer.
+<div class="res-img">[[File:TD2223-2_Connect_VGA.png|400px|Connecting to VGA]]</div>
 ==Audio==
 Plug an audio cable into the Audio In/Audio Out port of the monitor. Plug the other end into your computer (Audio In) or ear-/headphones (Audio Out).
-:'''NOTE:''' The monitor is also equipped with dual speakers.
+{{Note| The monitor is also equipped with dual speakers.}}
+<div class="res-img">[[File:TD2223-2_Connect_Audio.png|400px|Connecting to Audio]]</div>
 ==USB==
 Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.
-:'''NOTE:''' The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines:
+<div class="res-img">[[File:TD2223-2_Connect_USB.png|400px|Connecting to USB]]</div>
+The monitor supports two (2) types of USB ports. When making the connection(s), observe the following guidelines:
 :{| class="wikitable" style=" text-align: center; width: 60%; background-color:#ffffff;"
 ! style="background-color:#DB0025; color:#ffffff;" width=15%| USB
@@ Line 48: / Line 49: @@
 |Two (2)
 |style="text-align:left;"|Connection for your Type A peripheral device(s) (e.g., storage device, mouse, keyboard, etc.).
-:'''NOTE:''' To activate the USB Type A port, ensure your computer is also connected to the monitor’s USB Type B port.
 |-
 |'''Type B'''
@@ Line 55: / Line 55: @@
 |-
 |}
+{{Note|To activate the USB Type A port, ensure your computer is also connected to the monitor’s USB Type B port.}}
 =Touch Function Control=
 Before using the touch function, ensure the USB Type B to Type A cable is connected to your computer and the Windows operating system is running.
+<div class="res-img">[[File:TD2223-2_Touch_Function_Control.png|400px|Touch Function Control]]</div>
 When using the touch function, please note:
 *The touch function may need about five (5) seconds to resume if the USB cable is removed and plugged in again, or the computer resumes from ''Sleep Mode''.
@@ Line 71: / Line 71: @@
 * Touch accuracy is ± 2 mm over 90% of the touch active area located in the middle area.
 * Touch size at 10% of the edge area is ≥ 8 mm (as illustrated below); the area at the edges without might not support any touch.
+:<div class="res-img">[[File:TD2223-2_Touch_Accuracy.png|400px|Touch Accuracy]]</div>
 * Please use a spherical tip stylus with a minimum diameter of 3 mm in 90% of the touch active area.
 * Please use a spherical tip stylus with a minimum diameter of 8 mm in 10% of the edge area.

TD2223-2 Connecting Power and Devices: Difference between revisions