• Print Print

ID0730 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> __NOTOC__ {{Sticky_Menu_ViewBoard_Notepad |1=ID0730_Introduction |2=ID0730_Making_Connections |3=ID0730_Using_the_Driver |4=ID0730_Specifications |5=ID0730_Regulat..."
 
 
(4 intermediate revisions by the same user not shown)
Line 8: Line 8:
}}
}}
</noinclude>
</noinclude>
=Connecting the Pen Display=
=Attaching the Notebook=
<ol><li>Turn the device over so the bottom side is facing up.</li>
<ol><li>Turn the Notebook over so the bottom side is facing up.</li>
<div class="res-img">[[File:PD0711_Connection_1.png|400px]]</div>
<div class="res-img">[[File:ID0730_Connection_1.png|500px]]</div>
<li>Plug the USB Type A end of the USB cable into the ''USB Port'' on the device.</li>
<li>It is recommended to apply the double-sided tape to the bottom of the Notebook in the designated area.</li>
<div class="res-img">[[File:PD0711_Connection_2.png|300px]]</div>
<div class="res-img">[[File:ID0730_Connection_2.png|300px]]</div>
<li>Connect the Main USB A cable to the computer. The Secondary USB A cable can be connected to a fully powered USB port on the computer.</li>
<li>Turn over the Notebook and attach it within the four corner frame of the Digital Writing Pad.</li>
<div class="res-img">[[File:PD0711_Connection_3.png|500px]]</div></ol>
<div class="res-img">[[File:ID0730_Connection_3.png|500px]]</div></ol>


=Connecting the Digital Writing Pad=
# With the USB Cable, connect the Micro USB end to the Digital Writing Pad.
# Connect the USB Type A end to the computer.
::<div class="res-img">[[File:ID0730_Connect_Pad.png|600px]]</div>
:<small>'''NOTE:''' Do not write on the Digital Writing Pad without the Notebook, this will leave ink marks and affect the surface.</small>


{{#seo:
{{#seo:

Latest revision as of 09:43, 22 April 2022

ID0730 Making Connections
Introduction
Making Connections
Driver Installation, Use, and Removal
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Attaching the Notebook

  1. Turn the Notebook over so the bottom side is facing up.
  2. It is recommended to apply the double-sided tape to the bottom of the Notebook in the designated area.
  3. Turn over the Notebook and attach it within the four corner frame of the Digital Writing Pad.

Connecting the Digital Writing Pad

  1. With the USB Cable, connect the Micro USB end to the Digital Writing Pad.
  2. Connect the USB Type A end to the computer.
NOTE: Do not write on the Digital Writing Pad without the Notebook, this will leave ink marks and affect the surface.
Retrieved from "https://manuals.viewsonic.com/index.php?title=ID0730_Making_Connections&oldid=17946"