View source for X100-4K+ Operation

<noinclude>
{{Sticky_Menu_Projector
|1=X100-4K+_Introduction
|2=X100-4K+_Remote_Control
|3=X100-4K+_Initial_Setup
|4=X100-4K+_Connecting_Power_and_Devices
|5=X100-4K+_Using_the_Projector
|6=X100-4K+_Operation
|7=X100-4K+_On-Screen_Display_Menu_Tree
|8=X100-4K+_On-Screen_Display_Menu_Options
|9=X100-4K+_Specifications
|10=X100-4K+_Regulatory_and_Service_Information
}}
{{Top}}
</noinclude>
=Home Screen=
The Home Screen is displayed every time you start the projector. To navigate the Home Screen, simply use the directional buttons on the remote control. You can return to the main Home Screen at any time by pressing the Home button on the remote control, regardless of what page you are on.
<div class="res-img">[[File:X10_Home_Screen.png|500px]]</div>

==Aptoide==
The projector is pre-loaded with the Aptoide store, which allows users to download and install different Apps.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Aptoide.png| Step 1 - Select Aptoide
File:X10_Aptoide_2.png| Step 2 - Navigate the store
</gallery>
# Select: '''Home''' > '''Aptoide'''.
# Use the directional buttons to navigate the menu options. When you find your preferred App, press the '''OK''' button to install it.
::'''NOTE:''' Users can install third-party Apps by .apk file in '''File Management'''. However, some third-party Apps may have compatibility issues. Additionally, some Apps may be Region-Specific and/or require a keyboard and mouse.

==Apps Center==
View, launch, and uninstall Apps.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Apps_Center_2.png| Step 1 - Select Apps Center
File:X10_Apps_Center.png| Step 2 - Launch the App
</gallery>
# To view your Apps, select: '''Home''' > '''Apps Center'''.
# Use the directional buttons to select the desired App. Then press '''OK''' on the remote control to launch the App.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===To Uninstall Apps===
# Open the '''Apps Center''' by selecting: '''Home''' > '''Apps Center'''.
# Use the directional buttons to select the desired App.
# Press and hold '''OK''' on the remote control for three (3) seconds.
# Select '''OK''' to uninstall the App.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===How to Access Netflix===
<youtube>eOkqf2V-iVQ</youtube>

==File Management==
Easily manage files and folders.
<gallery widths=300px heights=300px mode="nolines">
File:X10_File_Management_2.png| Step 1 - Select File Management
File:X100_File_Management.png| Step 2 - Navigate the files
</gallery>
# Select: '''Home''' > '''File Management'''.
# Select a device on the source list: USB, Local Storage, MicroSD, etc. Use the directional buttons to select the desired file. Then press '''OK''' on the remote control to open the selected file.
# Press the '''Return''' button to go to a previous a level.
::'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.

===How to Edit a File===
<div class="res-img">[[File:X100_File_Management_Edit.png|500px]]</div>
# While in '''File Management''', press and hold the '''OK''' button for three (3) seconds.
# A check box will appear at the front of each file. Use the directional buttons and press '''OK''' to select one or more files.
# By pressing the '''Right''' button, Copy, Paste, Cut, Delete, Select All, and Return boxes will be available for use.
# Select your desired action and press '''OK''' to execute.
# If you are Copying or Cutting, select your destination folder to complete the process.

====How to Use Control Bar Buttons====
The Control Bar buttons will appear on screen if a video, music, or photo file are selected to be opened.
<div class="res-img">[[File:X100_Control_Bar.png|400px]]</div>

'''Tips for using USB''' <br />
When using USB for reading and/or storage please keep in mind the following:
# Some USB storage devices may not be compatible.
# If you use an USB extension cable, the USB device may not recognize the USB.
# Only use USB storage devices formatted with Windows FAT32 or NTFS file system.
# Larger files will need extra time to load.
# Data on USB storage devices may be damaged or lost. Back up important files.

====Supported File Formats====
* Supported Office formats:
<div class="res-img">[[File:X10_Office_Files.png|500px]]</div>

* Supported Multimedia formats:
<div class="res-img">[[File:X100_Media_Files.png|500px]]</div>

===Video - File Management===
<youtube height=250px width=400px>8MQiYkDD-2I</youtube>

==Setting==
Under '''Setting''' you can adjust Network, Basic, and Advanced Settings, Date & Time, Firmware Update, and view Information.

===Network Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Settings.png| Step 1 - Select Network Settings
</gallery>
# Select: '''Home''' > '''Setting''' > '''Network Settings'''.
# Choose from one of the available options: Wi-Fi or Wired LAN.

===Basic Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Basic_Settings.png| Step 1 - Select Basic Settings
X100_Basic_Settings_1.png| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Basic Settings'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.
# To return to a previous menu press the '''Return''' button.

===Date & Time===
Adjust Date, Time, Time Zone, and Time Format.
:'''NOTE:''' The time is displayed in the top-right corner after connecting to the Internet.
<gallery widths=300px heights=300px mode="nolines">
X10_Date_Time.png| Step 1 - Select Date & Time
X10_Date_Time_1.png| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Date & Time'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.

===Firmware Upgrade===
Users can update the firmware by internet or USB, and check the version number.
:'''NOTE:''' Do not unplug the power cord, USB, or disconnect from the Internet during the upgrading process.
<gallery widths=300px heights=300px mode="nolines">
X10_Firmware_1.png| Step 1 - Select Firmware Upgrade
X100_Firmware_2.png| Step 2 - Choose an option
</gallery>
# Before entering the '''Firmware Upgrade''' menu, ensure the projector is connected to the Internet.
# To enter the menu, select: '''Home''' > '''Setting''' > '''Firmware Upgrade'''.

'''Firmware Update Online'''
# Go to: '''Home''' > '''Setting''' > '''Firmware Upgrade''' > '''Software Update Online.'''
# Select '''Enter''' by pressing '''OK''' on the remote control.
# The system will check the ViewSonic website (OTA) and display a dialog message if there is new Firmware.
# After selecting '''Yes''', a progress bar will appear as the update process begins.
# After reaching 100% the projector will restart. The whole process will take about 10 minutes.
# After updating the Firmware, it will take a few minutes to restart the projector.

'''Firmware Update by USB '''
:'''NOTE:''' NTFS format, read only.
# Download the latest version from the ViewSonic website and copy the file to a USB device.
# Plug the USB into the projector, then go to: '''Home''' > '''Setting''' > '''Firmware Upgrade''' > '''Software Update By USB'''.
# Select '''Enter''' by pressing '''OK''' on the remote control.
# The system will detect the Firmware version and display the above dialog message.
# After selecting '''Yes''', a progress bar will appear as the update process begins.
# After reaching 100% the projector will restart. The whole process will take about 10 minutes.
# After updating the Firmware, it will take a few minutes to restart the projector.

===Advanced Settings===
<gallery widths=300px heights=300px mode="nolines">
X10_Advanced_Settings_1.png| Step 1 - Select Advanced Settings
X100_Advanced_Settings_2.png| Step 2 - Choose an option
</gallery>
# Select: '''Home''' > '''Setting''' > '''Advanced Settings'''.
# Use the '''Up''' and '''Down''' buttons to select the desired option and press '''OK'''. Then use the '''Left''' and '''Right''' buttons to make adjustments or selections.
# To return to a previous menu press the '''Return''' button.

===Information===
:'''NOTE:''' Press the '''Home''' button on the remote control to return to the '''Home Screen''' at anytime.
<gallery widths=300px heights=300px mode="nolines">
X10_Information_1.png| Step 1 - Select Information
X100_Information_2.png| Step 2 - View the information
</gallery>
# Select: '''Home''' > '''Setting''' > '''Information'''.
# View system status and information.
<noinclude>

==Screen Mirroring==
<i>Please see</i> <big>[[Wireless_Screen_Mirroring| Wireless Screen Mirroring]]</big>
</noinclude>
==Adding Apps==
Add your favorite Apps to the '''Home Screen'''.
<gallery widths=300px heights=300px mode="nolines">
File:X10_Add_App.png| Step 1 - Select Add App
File:X10_Add_App_1.png| Step 2 - Navigate the Apps
</gallery>
# From the '''Home Screen''', select '''Add App''' and then press '''OK''' on the remote control.
# Use the directional buttons to select the desired App and press '''OK'''.
# Now your favorite App will appear on the '''Home Screen'''.

===Delete Apps from the Home Screen===
# From the '''Home Screen''', select the App you want to delete and press and hold '''OK''' for three (3) seconds.
# The message, “Do you want to Delete this application from My Favorites?” will appear.
# Select '''Yes''', and press '''OK''' to delete the App.

=Controlling the Projector through a LAN Environment=
The projector supports Crestron® software. With the correct settings in the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and projector are properly connected to the same local area network.

<div class="res-img">[[File:X100_LAN_Envi.png|500px]]</div>

===Configuring the LAN Control Settings===
If you are in an '''Automatic''' IP environment:

# Take a RJ45 cable and connect one end to the RJ45 '''Control''' port of the projector, and the other end to your network.
# Go to: '''Setting''' > '''Network Settings''' > '''Wired LAN Control'''.
# Select '''Configure IP''' and ensure it is set to '''Automatic'''.
# Wait for 15-20 seconds, then re-enter '''LAN Settings'''. Now, the projector’s IP Address, Subnet Mask, Default Gateway, and DNS Server settings will be displayed.
# Make note of the IP Address displayed in the Projector IP Address row.
:<small>'''NOTE:'''
::* If the Projector IP Address still does not appear, contact your network administrator.
::* If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server will display 0.0.0.0. Ensure the cables are properly connected and try the above steps again.
::* If you need to connect to the projector in its Standby Mode, set '''Standby LAN Control''' to '''On''' in the '''Network Settings''' menu.
</small>

If you are in a '''Manual''' Static IP environment:

# Take a RJ45 cable and connect one end to the RJ45 '''Control''' port of the projector, and the other end to your network.
# Go to: '''Setting''' > '''Network Settings''' > '''Wired LAN Control'''.
# Highlight '''LAN Settings''' and select '''Manual IP'''.
# Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server.
# Using the directional buttons, select the item you want to modify, and press Left/Right to enter the value.
# To save, select '''Apply''' and press '''Enter'''.
:<small>'''NOTE:''' If the RJ45 cables are not properly connected, the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server will display 0.0.0.0. Ensure the cables are properly connected and try the above steps again.</small>

===Controlling the Projector through a Web Browser===
Once you have the correct IP Address for the projector and the projector is On or in Standby Mode, you can use any computer that is on the same local area network to control the projector.
:<small>'''NOTE:'''
::* If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
::* The screenshots are for reference only, and may differ from the actual design.
::* Please pay attention to the limitation of input length (including space and other punctuation keys) in the list below:
</small>
{| class="wikitable" style="text-align:center;"
|- 
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" colspan="2" | Category Item
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Input Length
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Maximum Number of Characters
|-
| rowspan="11" style="font-weight:bold;" | Network Settings
| rowspan="5" | Network
| DHCP/Manual
| (N/A)
|-
| IP Address
| XXX.XXX.XXX.XXX
|-
| Subnet Mask
| XXX.XXX.XXX.XXX
|-
| Gateway
| XXX.XXX.XXX.XXX
|-
| DNS Server
| XXX.XXX.XXX.XXX
|-
| rowspan="3" | Password
| Administrator
| (N/A)
|-
| New Password
| 4
|-
| Confirm Password
| 4
|-
| rowspan="3" | SNMP
| SysLocation
| 22
|-
| SysName
| 22
|-
| SysContact
| 22
|-
| rowspan="7" style="font-weight:bold;" | Email Alert
| rowspan="4" | Email Setting
| To
| 40
|-
| Cc
| 40
|-
| Subject
| 40
|-
| From
| 40
|-
| rowspan="3" | SMPT Setting
| Server
| 30
|-
| User Name
| 21
|-
| Password
| 14
|-
| rowspan="5" style="font-weight:bold;" | Email Alert
| rowspan="5" | Alert Condition
| Fan Error
| (N/A)
|-
| Light Source Error
| (N/A)
|-
| Over Temperature
| (N/A)
|-
| Submit
| (N/A)
|-
| Issue Test Mail
| (N/A)
|}

<ol><li>Enter the address of the projector in the address bar of your browser and press '''Enter'''.</li>
<div class="res-img">[[File:X100_Control_Web_1.png]]</div>
<li>The main page of the Network Control will load:
<div class="res-img">[[File:X100_Control_Web_2.jpg]]</div>
::<small>'''NOTE:''' Accessing the Network Settings, Email Alert page, or Projector/LAN Firmware update page requires the Administrator’s password. The default password is '''0000'''.</small></li>
<li>This page allows you to make adjustments to the SNMP settings.</li>
<li>If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it to alert you via email on significant events.</li>
<li>The Crestron (e-Control)® page displays the Crestron e-Control user interface.</li></ol>

===About Crestron e-Control®===
The Crestron e-Control® page provides a variety of virtual keys to control the projector or adjust the projected pictures.
<div class="res-img">[[File:X100_Control_LAN_3.png|400px]]</div>

<ol type="i"><li>These buttons function the same as the ones on the OSD Menus or remote control.</li>
<li>To switch between input signals, click on the desired signal.</li></ol>
::<small>'''NOTE:'''
::* The source list varies according to the connections available on the projector.
::* When you use the projector control panel or remote control to change the OSD Menu settings, it make take a while for the web browser to synchronize these changes with the projector.</small>

The '''Tools''' page allows you to manage the projector, configure the LAN control settings, and secure access to remote network operations on the projector.
<div class="res-img">[[File:X100_Control_Web_4.png|400px]]</div>
<ol type="i"><li>This section is only used with the Crestron Control System. Please contact Crestron or refer to its user manual for setup information.</li>
<li>Name the projector, keep track of its location, and the person in charge of it.</li>
<li>Adjust the LAN Control Settings.</li>
<li>Once set, access to the remote network operation on the projector will be password protected.</li>
<li>Once set, access to the '''Tools''' page will be password protected.
:<small>'''NOTE:''' 
:* To prevent errors, only input the English alphabet and digits on the '''Tools''' page.
:* After making the adjustments, press the '''Send''' button and the data will be saved for the projector.</small></li>
<li>Press '''Exit''' to go back to the Remote Network Operation page.</li>
</ol>

Please pay attention to the limitation of input length (including space and other punctuation keys) in the list below:
{| class="wikitable" style="text-align:center;"
|- 
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Category Item
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Input Length
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Maximum Number of Characters
|-
| rowspan="3" style="font-weight:bold;" | Crestron Control
| IP Address
| 16
|-
| IP ID
| 4
|-
| Port
| 5
|-
| rowspan="3" style="font-weight:bold;" | Projector
| Projector Name
| 22
|-
| Comment
| 32
|-
| Assigned To
| 22
|-
| rowspan="5" style="font-weight:bold;" | Network Configuration
| DHCP (Enabled)
| (N/A)
|-
| IP Address
| 16
|-
| Subnet Mask
| 16
|-
| Default Gateway
| 16
|-
| DNS Server
| 16
|-
| rowspan="3" style="font-weight:bold;" | User Password
| Enabled
| (N/A)
|-
| New Password
| 15
|-
| Confirm
| 15
|-
| rowspan="3" style="font-weight:bold;" | Admin Password
| Enabled
| (N/A)
|-
| New Password
| 15
|-
| Confirm
| 15
|}
The '''Info''' page displays the information and status of the projector. For more information, visit: http://www.crestron.com.

{{#seo:
|title=ViewSonic Projector
|title_mode=append
|keywords=X100-4K+, File Management, Apps Center, Bluetooth, Settings, Screen Mirroring, Adding Apps
|description=Learn how to use X100-4K+ projector.
}}

[[Category:X100-4K+]]