View source for VPC-A31-O1 Initial Setup

<noinclude>
{{Sticky_Menu_VPC-A31-O1
|1=VPC-A31-O1_Introduction
|2=VPC-A31-O1_Initial_Setup
|3=VPC-A31-O1_Making_Connections
|4=VPC-A31-O1_Using_the_Device
|5=VPC-A31-O1_Settings
|6=VPC-A31-O1_Pre-installed_Applications_and_Settings
|7=VPC-A31-O1_Appendix
|8=VPC-A31-O1_Regulatory_and_Service_Information
}}
</noinclude>
=Installing the VPC-A31-O1=
<ol><li>Remove the slot-in PC cover of the display.</li>
<div class="res-img">[[File:VPC-A31-O1_Initial_Setup_1.png|600px]]</div>
<li>Using the handle of the VPC-A31-O1, carefully insert it into the PC slot of the display.</li>
<div class="res-img">[[File:VPC-A31-O1_Initial_Setup_2.png|700px]]</div>
:'''NOTE:''' 
:* Ensure the handle and vents of the VPC-A31-01 are facing outwards.
:* The right installation direction is to avoid damage to the OPS terminal and maintain proper ventilation.
<div class="res-img">[[File:VPC-A31-O1_Initial_Setup_3.png|500px]]</div>
<li>Secure the VPC-A31-O1 to the display with the two (2) included screws.</li>
:'''NOTE:''' 
:* Please note that the three (3) antennas must be installed on the VPCA31-O1.
:* Please pay attention to the installation direction of the VPC-A31-O1, with the vents facing outwards to avoid damage.
:* The VPC-A31-O1 does not support hot swapping. When removing the device, turn off the power supply for both the display and VPC-A31-O1 first.
</ol>


{{#seo:
|title=ViewBoard Accessories
|title_mode=append
|keywords=ViewBoard, VPC-A31-O1, setting up the PC
|description=Setting up the VPC-A31-O1.
}}

[[Category:VPC-A31-O1]]