View source for VB-STND-008 Making Connections

<noinclude>
{{Sticky_Menu_VB-STND-007
|1=VB-STND-008_Introduction
|2=VB-STND-008_Initial_Setup
|3=VB-STND-008_Making_Connections
|4=VB-STND-008_Controlling_the_Lift
|5=VB-STND-008_Appendix
|6=VB-STND-008_Regulatory_and_Service_Information
}}
</noinclude>
=Connecting to Power=
<ol><li>Connect the power cord to the Trolley Cart.</li>
<li>Plug the power cord plug into a power outlet.</li>
<div class="res-img">[[File:VB-STND-007_Connect_Power_1.png|300px]]</div>
<div class="res-img">[[File:VB-STND-008_Power_Cord.png|500px]]</div>
<li>Use the cord clamp to secure the cords in place.</li>
<div class="res-img">[[File:VB-STND-008_Connect_Power_2.png|300px]]</div>
</ol>

=Connecting to the Control Pad=
Connect the Control Pad to the Trolley Cart via the RJ45 Port.
{{Note|The Control Pad has a magnet on the back. The Control Pad can be attached to any metal surface on the Trolley Cart. Make sure the attached area does not obstruct the Lift functions.}}
<div class="res-img">[[File:VB-STND-008_Connect_Control_Pad.png|500px]]</div>

=Connecting to the IFP=
# Connect the IFP to the AC power output of the Trolley Cart.
# Connect the USB Type A cord to both the IFP and the Trolley Cart.
:<div class="res-img">[[File:VB-STND-008_Connect_IFP.png|500px]]</div>



{{#seo:
|title=ViewBoard Accessory
|title_mode=append
|keywords=ViewBoard, VB-STND-008, stand, connect, power, IFP, ViewBoard
|description=Connecting the ViewBoard VB-STND-008 Stand to power and other devices.
}}

[[Category:VB-STND-008]]