View source for PD2211 PD2211T Initial Setup

<noinclude>
{{Sticky_Menu_Pen_Display_PD
|1=PD2211_PD2211T_Introduction
|2=PD2211_PD2211T_Initial_Setup
|3=PD2211_PD2211T_Making_Connections
|4=PD2211_PD2211T_Adjusting_the_Viewing_Angle
|5=PD2211_PD2211T_Quick_Menu
|6=PD2211_PD2211T_Hot_Keys
|7=PD2211_PD2211T_On-Screen_Display_Menu_Operation
|8=PD2211_PD2211T_On-Screen_Display_Menu_Tree
|9=PD2211_PD2211T_Pen_Input_Area_Mapping
|10=PD2211_PD2211T_Specifications
|11=PD2211_PD2211T_Regulatory_and_Service_Information
}}
</noinclude>
=Wall Mounting=
Refer to the table below for the standard dimensions for wall mount kits.

:{{Note|For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.}}
{| class="wikitable" style="text-align: center;"
|-
! style="background-color:#c41230; color:#ffffff;"|Maximum Loading
! style="background-color:#c41230; color:#ffffff;"|Hole Pattern (W x H)
! style="background-color:#c41230; color:#ffffff;"|Interface Pad (W x H x D)
! style="background-color:#c41230; color:#ffffff;"|Pad Hole
! style="background-color:#c41230; color:#ffffff;"|Screw Specification & Quantity
|-
|14 kg
|100 x 100 mm
|115 x 115 x 2.6 mm
|Ø 5 mm
|M4 x 10 mm - 4 pieces
|}
<ol><li>Turn off the device and disconnect all cables.</li>
<li>Turn off the device and disconnect all cables.</li>
<li>Place the device on a flat, stable surface with the screen facing down.</li>
<li>Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).</li>
:<div class="res-img">[[File:PD2211_PD2211T_Wall_Mounting_VESA.png|500px]]</div>
<li>Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.</li></ol>

=Turning the Device On/Off=
<div class="res-img">[[File:PD2211_PD2211T_Turning_On.png|500px]]</div>
<ol><li>Plug the power cord into a power outlet.</li>
<li>Press the '''Power''' key to turn on the display.</li>
<li>To turn the display off, press the '''Power''' key again.</li>
{{Note|The display will still consume some power as long as the power cord is connected to the power outlet. If the display is not being used for a long period of time, please disconnect the power plug from the power outlet.}}</ol>


{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=PD2211, PD2211T, stand installation, wall mounting, VESA 
|description=How to install and uninstall the stand on the PD2211 / PD2211T monitor. 
}}

[[Category:PD2211]]
[[Category:PD2211T]]