View source for PD1013 PD1013T Using the Display

<noinclude>
{{Sticky_Menu_Pen_Display
|1=PD1013_PD1013T_Introduction
|2=PD1013_PD1013T_Making_Connections
|3=PD1013_PD1013T_Adjusting_the_Viewing_Angle
|4=PD1013_PD1013T_Using_the_Display
|5=PD1013_PD1013T_Setting_the_Display_Area
|6=PD1013_PD1013T_Pen_Input_Area_Mapping
|7=PD1013_PD1013T_Specifications
|8=PD1013_PD1013T_Regulatory_and_Service_Information
}}
</noinclude>
=Using the Pen Tether=
The ''Pen Tether'' can be attached to the ''Pen'' and to the available anchor point.
<div class="res-img">[[File:PD1013_PD1013T_Pen_Tether.png|400px]]</div>

=Using the Touch Function (PD1013T only)=
The PD1013T can detect up to 10 fingers simultaneously depending on the application.
<div class="res-img">[[File:PD1013T_Touch.png|400px]]</div>

When using the touch function, please note:
* The touch function may need about five (5) seconds to resume if the USB cable is removed and plugged in again, or the computer resumes from Sleep Mode.
* The touchscreen can only detect up to ten (10) fingers simultaneously.
* If the Windows’ cursor does not accurately follow your finger when you touch the screen, do the following:
:# Open: '''Control Panel''' > '''Hardware and Sound''' > '''Tablet PC Settings'''.
:# Select '''Calibration'''.
:# Follow the instructions to recalibrate your screen.

{{#seo:
|title=ViewSonic Pen Display
|title_mode=append
|keywords=PD1013, PD1013T, Pen tether, touch function
|description=Using the PD1013 / PD1013T. 
}}

[[Category:Pen Display]]
[[Category:PD1013]]
[[Category:PD1013T]]