View source for M1 Plus Using the Projector

<noinclude>
{{Sticky_Menu_Projector_No_Ceiling
|1=M1_Plus_Introduction
|2=M1_Plus_Remote_Control
|3=M1_Plus_Initial_Setup
|4=M1_Plus_Connecting_Power_and_Devices
|5=M1_Plus_Using_the_Projector
|6=M1_Plus_Operation
|7=M1_Plus_On-Screen_Display_Menu_Tree
|8=M1_Plus_On-Screen_Display_Menu_Options
|9=M1_Plus_Specifications
|10=M1_Plus_Regulatory_and_Service_Information
}}
</noinclude>
__NOTOC__=Starting the Projector=
<div class="res-img">[[File:M1_Startup.png|300px]]</div>
# Ensure the projector is connected to a power source or that the battery has sufficient charge.
# Press and hold the '''Power''' button for three (3) seconds to turn on the projector; or press the '''Power''' button on the remote control.
# Move the Smart Stand to your desired viewing angle.
<br>
<div class="res-img">[[File:M1_Smartstand.png|300px]]</div>

=Adjusting the Projector's Height and Projection Angle=
The projector is equipped with one (1) Smart Stand. Adjusting the stand will change the projector’s height and the vertical projection angle. Carefully adjust the stand to fine tune the projected image’s position.
<div class="res-img">[[File:M1_Height_Adjust.png|600px]]</div>
:'''NOTE:''' If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the projected image can become trapezoidal. However, the “Auto Vertical Keystone” function will correct the issue automatically.

=Adjusting the Focus=
To adjust the image focus of the on-screen image, slowly move the focus ring upwards or downwards.
<div class="res-img">[[File:M1_Focus.png|300px]]</div>

=Shutting Down the Projector=
Press and hold the '''Power''' button on the projector or press the '''Power''' button on the remote control.

[[Category:M1+]]
[[Category:M Series]]