View source for LS901HD LS901-4K Mounting the Projector/en

==Mounting the Projector==
{{Note|If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.}}

<ol>
    <li> To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.
    </li>
    <li>Make sure the screws used to attach the mount to the projector meet the following specifications:
        <ul> 
            <li>Screw type: M4 x 10</li>
            <li>Maximum Screw Length: 10 mm
                <div class="res-img">[[File:LS901HD_Mount.png|400px| Mounting points | alt= Mounting points]]</div>
            </li>
        </ul>
    </li>

</ol>

{{Note-yellow|'''CAUTION'''
:* Avoid installing the projector near a heat source or air conditioner.
:* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
}}