LS901HD LS901-4K Mounting the Projector

Mounting the Projector

Note: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.

1. To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.
2. Make sure the screws used to attach the mount to the projector meet the following specifications:
   • Screw type: M4 x 10
   • Maximum Screw Length: 10 mm
     

CAUTION

• Avoid installing the projector near a heat source or air conditioner.
• Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.