View source for LS901HD LS901-4K Mounting the Projector

==Mounting the Projector==
{{Note|<translate><!--T:1--> If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.</translate>}}

<ol>
    <li> <translate><!--T:2--> To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.</translate>
    </li>
    <li><translate><!--T:3--> Make sure the screws used to attach the mount to the projector meet the following specifications:</translate>
        <ul> 
            <li><translate><!--T:4--> Screw type: M4 x 10</translate></li>
            <li><translate><!--T:5--> Maximum Screw Length: 10 mm</translate>
                <div class="res-img">[[File:LS901HD_Mount.png|400px| <translate><!--T:6--> Mounting points</translate> | alt= <translate><!--T:7--> Mounting points</translate>]]</div>
            </li>
        </ul>
    </li>

</ol>

{{Note-yellow|'''<translate>CAUTION</translate>'''
:* <translate>Avoid installing the projector near a heat source or air conditioner.</translate>
:* <translate>Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.</translate>
}}