View source for LS751HD Remote Control

<noinclude>
{{Sticky_Menu_Projector
|1=LS751HD_Introduction
|2=LS751HD_Remote_Control
|3=LS751HD_Initial_Setup
|4=LS751HD_Connecting_Power_and_Devices
|5=LS751HD_Using_the_Projector
|6=LS751HD_Operation
|7=LS751HD_On-Screen_Display_Menu_Tree
|8=LS751HD_On-Screen_Display_Menu_Options
|9=LS751HD_Specifications
|10=LS751HD_Regulatory_and_Service_Information
}}
</noinclude>
=Overview=
[[File:LS710HD_LS751HD_Remote_Control.JPG|thumb|250px| Remote Control]]

{| class="wikitable" style="text-align:center; width:60%; background-color:#ffffff;"
! style="font-weight:bold; background-color:#db0025; color:#ffffff;" | Number
! style="text-align: center; font-weight:bold; background-color:#db0025; color:#ffffff;" | Button
! style="text-align: center; font-weight:bold; background-color:#db0025; color:#ffffff;" | Description
|-
| '''1'''
| AV Mute
| Hides the screen picture and volume mute.
|-
| '''2'''
| Power
| Turns the projector On or Off.
|-
| '''3'''
| Auto Sync
| Automatically determines the best picture timings for the displayed image.
|-
| '''4'''
| Source
| Displays the input source selection bar.
|-
| '''5'''
| Navigation Buttons
| Navigates and selects the desired menu items and make adjustments.
|-
| '''6'''
| Enter
| Confirms the selection.
|-
| '''7'''
| Menu/Exit
| *Turns the On-Screen Display (OSD) Menu On or Off.
*Go back to a previous OSD Menu.
*Exit and Save menu settings.
|-
| '''8'''
| Brightness
| Displays the brightness mode selection bar.
|-
| '''9'''
| Volume Up
| Increase the volume level.
|-
| '''10'''
| Keystone
| Manually correct distorted images.
|-
| '''11'''
| Volume Down
| Decrease the volume level.
|-
| '''12'''
| Video
| ''Unsupported Button''
|-
| '''13'''
| VGA
| ''Unsupported Button''
|-
| '''14'''
| HDMI
| Selects the '''HDMI 1''' or '''HDMI 2''' input source.
|-
| '''15'''
| Aspect
| Displays the aspect ratio selection bar.
|-
| '''16'''
| Page Up
| ''Unsupported Button''
|-
| '''17'''
| Zoom In
| Increases the projected image size.
|-
| '''18'''
| Freeze
| Freeze the projected image.
|-
| '''19'''
| Zoom Out
| Reduces the projected image size.
|-
| '''20'''
| Page Down
| ''Unsupported Button''
|-
| '''21'''
| Display Mode
| Displays the color mode selection bar.
|-
| '''22'''
| Mouse Mode
| ''Unsupported Button''
|-
| '''23'''
| Mute
| Mute/Unmute.
|-
|}
=Remote Control - Receiver Range=
[[File:LS751HD_Remote_Control_Effective_Range.JPG|thumb|300px| IR Receiver Location]]
To ensure proper function of the remote control follow the steps below:
# The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
# The distance between the remote control and the sensor(s) should not exceed:
::*Font IR:10 m (32.8 ft)
::*Top IR: 7 m (23 ft.)
::::<small>'''NOTE:''' Refer to the illustration for the location of the infrared (IR) remote control sensor(s).</small>

=Replacing the Batteries=
# Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
# Remove any existing batteries (if necessary) and install two AAA batteries.
:::<small>'''NOTE:''' Observe the battery’s polarities as indicated.</small>
<ol start="3"><li>Replace the battery cover by aligning it with the base and pushing it back into position.
<div class="res-img">[[File:LS710HD_LS751HD_Replacing_Batteries.JPG|400px]]</div></li></ol>
:::<small>'''NOTE:'''
:::* Avoid leaving the remote control and batteries in excessive heat or a humid environment.
:::* Replace only with the same or equivalent type recommended by the battery manufacturer.
:::* If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
:::* Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.</small>

{{#seo:
|title=ViewSonic Projectors
|title_mode=append
|keywords=Projectors, LS Series, Remote Control
|description= An introduction to the LS751HD projector's remote control.
}}

[[Category:LS751HD]]