View source for IFP105S Connecting Devices

<noinclude>
{{Sticky_Menu_ViewBoard
|1=IFP105S_Introduction
|2=IFP105S_Remote_Control
|3=IFP105S_Using_Gestures
|4=IFP105S_Connecting_Devices
|5=IFP105S_Using_the_ViewBoard
|6=IFP105S_On-Screen_Display_Menu
|7=IFP105S_Embedded_Player
|8=IFP105S_Embedded_Applications
|9=IFP105S_RS-232_Protocols
|10=IFP105S_Specifications
|11=IFP105S_Regulatory_and_Service_Information
}}
</noinclude>
=Connecting External Devices and Touch Connection=
<div class="res-img">[[File:IFP105S_External_and_Touch_Connection.png|Connecting External Devices|600px]]</div>
Your external device(s) can be connected in any of the following configurations:

==USB Type C Connection==
To connect via USB Type C:
:Connect a USB Type C cable from your external device to the '''Type C''' port on the display.

==DisplayPort Connection==
To connect via DisplayPort:
# Connect a DisplayPort cable from your external device to the '''DP IN''' port on the display.
# Connect a USB cable to the external device from the '''TOUCH 1''' port of the display.

==HDMI Connection==
To connect via HDMI:
# Connect an HDMI cable from your external device to the '''HDMI 1/2/3/4''' port on the display.
# Connect a USB cable to the external device from the appropriate '''TOUCH''' port of the display.
::'''NOTE:''' The '''TOUCH 1''' port is for the '''HDMI 1''' port. The '''TOUCH 2''' port is for the '''HDMI 2''' and '''HDMI 3''' ports. The '''TOUCH 3''' port is for the '''HDMI 4''' port.

=RS-232 Connection=
<div class="res-img">[[File:IFP62_RS-232_Connection.png|RS-232 Connection|600px]]</div>
When you use a RS-232 serial port cable to connect your display to an external computer certain functions can be controlled remotely by the PC, including Power ON/OFF, Volume adjustment, Input select, Brightness, and more.

=USB and Networking Connections=
Just like any PC, it is easy to connect various USB devices and other peripherals to the display.

==USB Peripherals==
<div class="res-img">[[File:IFP62_USB_Connection.png|USB Connection|600px]]</div>
Plug the USB device cable into the '''USB''' port.

==Networking and Modem cables==
<div class="res-img">[[File:IFP62_LAN_Connection.png|Network Connection|600px]]</div>
Plug the network cable into a '''LAN''' port.

=Media Player Connection=
<div class="res-img">[[File:IFP62_Media_Player_Connection.png|Media Player Connection|500px]]</div>
To connect a media player:
# Connect the HDMI cable to the '''HDMI IN''' port on the display and peripheral device.
# Plug in the power cord of the display, and turn on the power supply switch.
# Press the '''Power''' button on the display to turn the screen on.
# Press the '''INPUT''' button on the remote control and switch to the “HDMI” input source.

=Audio Connection=
The ViewBoard supports '''Audio In''', '''Audio Out''', and '''SPDIF'''.

==Audio In==
To play audio from your external device through the ViewBoard’s speakers, connect one end of an audio cable to your external device, and the other end to the ViewBoard’s '''AUDIO IN''' port.
<div class="res-img">[[File:IFP_Audio_In_Connection.png|Audio In Connection|600px]]</div>

==Audio Out==
To play audio from the ViewBoard through an external speaker, connect one end of an audio cable to the external speaker, and the other end to the ViewBoard’s '''AUDIO OUT''' port.
<div class="res-img">[[File:IFP_Audio_Out_Connection.png|Audio Out Connection|600px]]</div>

==SPDIF Connection==
<div class="res-img">[[File:IFP62_SPDIF_Connection.png|SPDIF Connection|600px]]</div>
To connect to an external sound system:
# Connect an optical cable from the '''SPDIF''' port to your sound system’s optical connector.
# Plug in the power cord of your ViewBoard, and turn on the rear-panel power supply switch.
# Press the '''Power''' button on the right-hand side of the ViewBoard to turn the screen on.

=Video Output Connection=
<div class="res-img">[[File:IFP62_Video_Output_Connection.png|Video Output Connection|600px]]</div>
To output video via a display device:
# Connect an HDMI cable to the '''HDMI IN''' port of your display device, and the other end to the '''HDMI OUT''' port of your ViewBoard.
# Plug in the power cord of your ViewBoard, and turn on the power supply switch.
# Press the '''Power''' button on the right-hand side of the ViewBoard to turn the screen on.

{{#seo:
|title=ViewSonic ViewBoard
|title_mode=append
|keywords=ViewSonic, ViewBoard, IFP105S, Connecting devices, HDMI, DisplayPort, VGA, SPDFI, Audio, Video, USB
|description=View the connection options for the IFP105S ViewBoard.
}}

[[Category:IFP105S]]