View source for ViewBoard Cast Button Pairing

<noinclude>
{{Sticky_Menu_ViewBoard_Cast_Button
|1=ViewBoard_Cast_Button_Device_Requirements
|2=ViewBoard_Cast_Button_Pairing
|3=ViewBoard_Cast_Button_Screen_Sharing
|4=ViewBoard_Cast_Button_BYOM
|5=ViewBoard_Cast_Button_Appendix
|6=ViewBoard_Cast_Button_Regulatory_and_Service_Information
}}
</noinclude>
=Windows PC and MacBook Pairing=
[[File:ViewBoard_Cast_Button_Pairing_1.jpg|thumb|200px|''Figure 1'' '''VB-WPS-001''']]
[[File:ViewBoard_Cast_Button_Pairing_2.jpg|thumb|200px|''Figure 2'' '''VB-WPS-003''']]
<ol><li>Plug-in the ViewBoard® Cast Button into your Windows PC or MacBook to pair.
*For VB-WPS-001: Please plug-in to the USB Type C port (Figure 1).
*For VB-WPS-003: Please plug-in to both the HDMI out and USB Type A ports (Figure 2).</li>
<li>If it is the first time to pair the ViewBoard® Cast Button with your Windows PC, please double click “ViewBoard Cast.exe” in: '''PC > CD Drive > ViewBoard Cast.'''
:'''NOTE:''' If running on a MacBook, please enter the user password to access the application installation permission.
</li>
<li>For PC, with the application installed, ViewBoard® Cast will launch automatically after the ViewBoard® Cast Button is plugged into the PC.</li>
<li>The pairing dialogue box will pop up on your PC. Please enter the Network Name, Password, and the vCastReceiver IP address shown on the IFP/CDE device home screen.</li>
<li>Click '''OK''' to complete the pairing of the ViewBoard® Cast Button and the IFP/CDE device.</li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_3.png|350px]]</div>
<li>Remove the ViewBoard® Cast Button and then plug it in again to start sharing</li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_4.png|350px]]</div>
<li>If the ViewBoard® Cast Button has been paired, and you would like to pair it with another IFP/CDE device, please click the “Pairing-Switch Button” at the bottom right corner.</li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_5.png|350px]]</div>
<li>Re-enter the network information to re-pair the ViewBoard® Cast Button. </li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_6.png|350px]]</div>
<li>After the ViewBoard® Cast Button is re-paired, please remove it and plug it in again to start sharing.</li></ol>
=ViewBoard IFP/CDE Pairing=
You can also plug-in the ViewBoard Cast Button into IFP/CDE device to pair if the IFP/CDE device is connected to a LAN (Ethernet cable).
===For VB-WPS-001:===
<ol><li>Attach the USB Type C to USB Type A adapter to the VB-WPS-001 ViewBoard® Cast Button</li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_7.png|350px]]</div>
<li>Then plug the ViewBoard® Cast Button into the IFP/CDE device’s USB port for pairing.
:'''NOTE:''' If running on a MacBook, please enter the user password to access the application installation permission.</li></ol>
===For VB-WPS-003:===
<ol><li>Plug the USB Type A cable into the IFP/CDE device’s USB port for pairing.</li>
<li>A “Pairing” dialogue box will appear.</li>
<li>Enter the Network Name and Password, then select '''Save''' to pair.</li>
:<div class="res-img">[[File:ViewBoard_Cast_Button_Pairing_8.png|500px]]</div>
</ol>
{{#seo:
|title=ViewBoard
|title_mode=append
|keywords=ViewBoard, Cast, Button, Device Requirements
|description=Pairing Instructions for the ViewBoard Cast Button
}}