VG3419C
Introduction
Package Contents
- Monitor
- Power cord
- Video cable
- USB cable
- Quick start guide
Product Overview
Front View
Rear View
I/O Ports
| # | Description |
|---|---|
| 1 | AC IN |
| 2 | HDMI |
| 3 | DisplayPort |
| 4 | USB Type C |
| 5 | LAN |
| 6 | USB Upstream |
| 7 | USB Downstream |
| 8 | Audio Out |
Initial Setup
Installing the Stand
Removing the Stand
- Turn off the monitor and disconnect all cables.
- Place the monitor on a flat, stable surface with the screen facing down.
- Remove the stand.
Mounting the Monitor
After removing the stand, the monitor can be mounted using an optional mounting kit.
| Maximum Loading | Hole Pattern (W × H) | Screw Specification | Screw Quantity |
|---|---|---|---|
| 14 kg | 100 × 100 mm | M4 × 10 mm | 4 |
- Attach the mounting bracket to the VESA mounting holes at the rear of the monitor, securing it with screws.
- Follow the mounting kit instructions to mount the monitor.
- For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
- Mounting kits are sold separately.
Using the Security Slot
To prevent theft and minimize damage, use a security slot locking device to secure the monitor to a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
Making Connections
Connecting to Power
- Connect the power cord to the AC IN jack at the rear of the device.
- Plug the power cord into a power outlet.
Connecting to External Devices
HDMI Connection
Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.
DisplayPort Connection
Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer.
USB Connection
Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.
The monitor supports three (3) types of USB ports. When making the connection(s), observe the following guidelines:
- Three (3) USB Type A ports: Connection for your Type A peripheral device(s) (e.g., storage device, keyboard, mouse).
Note: To use peripherals, please ensure your computer is also connected to the monitor’s USB Type B port.
- One (1) USB Type B port: Connect the USB Type B male cable (square with 2 cut corners) to this port, and then connect the other end of the cable to the USB downstream port of your computer.
- One (1) USB Type C port: Make sure your Type C output device and cable support video signal transmission for video output use.
Note: The USB Type C port supports the following charging specifications: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A (LPS).
Audio Connection
Plug the audio jack of the ear-/headphones into the Audio Out port of the monitor. Additionally, you can connect the monitor to a sound bar using an audio cable.
Ethernet Connection
Connect one end of your LAN (RJ45) cable to the LAN (RJ45) port of the monitor. Then connect the other end to your network.
Next, you must connect your computer to the monitor by either:
- USB Type C
- HDMI and USB Upstream
- DisplayPort and USB Upstream
Using the Monitor
Adjusting the Viewing Angle
For optimal viewing, you can adjust the viewing angle using any of the following methods:
Height Adjustment
Lower or raise the monitor to the desired height (0 to 150 mm).
Tilt Angle Adjustment
Tilt the monitor forwards or backwards to the desired viewing angle (−3.5° to 23°).
Turning the Monitor On/Off
- Make sure the monitor is connected to power.
- Press the Power button to turn on the monitor.
- To turn the monitor off, press the Power button again.
Using the Control Panel Keys
Use the control panel keys to access the Quick Menu, activate Hot Keys, navigate the On-Screen Display (OSD) Menu, and change the settings.
Input Select
Press the Input Select key to select an input source.
Volume
Press the Volume Up or Volume Down key to adjust the volume level.
Main Menu
Press or move the Joy Key to enter the On-Screen Display (OSD) Menu.
Exit
Press the Input Select key to exit the Main Menu.
Configuring the Settings
General Operations
- Press the Input Select key.
- Move the Joy Key left.
- When scrolling, move the Joy Key up or down.
On-Screen Display (OSD) Menu Tree
Input Select
| Menu Option |
|---|
| HDMI · DisplayPort · Type C |
Audio Adjust
| Sub-menu | Menu Option |
|---|---|
| Volume | 0–100 |
| Mute | On · Off |
ViewMode
| Sub-menu | Menu Option | |||
|---|---|---|---|---|
| Off | — | |||
| Office | Web · Text | |||
| Custom 1/2/3 | Low Input Lag | On · Off | ||
| Black Stabilization | 0–10 | |||
| Advanced DCR | 0–100/25 | |||
| Response Time | Standard · Advanced · Ultra Fast | |||
| Hue | Red | 0–100 | ||
| Green | 0–100 | |||
| Blue | 0–100 | |||
| Cyan | 0–100 | |||
| Magenta | 0–100 | |||
| Yellow | 0–100 | |||
| Saturation | Red | 0–100 | ||
| Green | 0–100 | |||
| Blue | 0–100 | |||
| Cyan | 0–100 | |||
| Magenta | 0–100 | |||
| Yellow | 0–100 | |||
| Rename | — | |||
| Recall | — | |||
| Movie | — | |||
| MAC | — | |||
| Mono | — | |||
| Game | FPS 1 · FPS 2 · RTS · MOBA | |||
Color Adjust
| Sub-menu | Menu Option | ||
|---|---|---|---|
| Contrast/Brightness | Contrast | 0–100 | |
| Brightness | 0–100 | ||
| Color Temperature | Bluish · Cool · Native · Warm | ||
| User Color | Red | 0–100 | |
| Green | 0–100 | ||
| Blue | 0–100 | ||
| Color Space | Auto · RGB · YUV | ||
| Color Range | Auto · Full Range · Limited Range | ||
| Gamma | 1.8 · 2.0 · 2.2 · 2.4 · 2.6 · 2.8 | ||
Manual Image Adjust
| Sub-menu | Menu Option |
|---|---|
| Sharpness | 0–100/25 |
| Blue Light Filter | 0–100 |
| Aspect Ratio | 4:3 · Full Screen |
| Overscan | On · Off |
Setup Menu
| Sub-menu | Menu Option | |
|---|---|---|
| Language Select | English · Français · Deutsch · Español · Italiano · Suomi · Русский · Türkçe · 日本語 · 한국어 · 繁體中文 · 简体中文 · Česká · Svenska | |
| FreeSync Premium | On · Off | |
| HDR | Auto · Off | |
| MPRT | On · Off | |
| Resolution Notice | On · Off | |
| Information | — | |
| OSD Timeout | 5 · 15 · 30 · 60 | |
| OSD Background | On · Off | |
| Power Indicator | On · Off | |
| Auto Power Off | On · Off | |
| Sleep | 30 Minutes · 45 Minutes · 60 Minutes · 120 Minutes · Off | |
| ECO Mode | Standard · Optimize · Conserve | |
| Energy Saving | On · Off | |
| USB Charging | On · Off | |
| DisplayPort 1.2 | On · Off | |
| USB 3.2 | On · Off | |
| KVM | Auto · USB-B · USB-C | |
| DDC/CI | On · Off | |
| Auto Detect | — | |
| All Recall | — | |
KVM Function
- Auto: When you connect two computers to the monitor, one using an HDMI (or DP) cable with a USB cable for data upstream, and the other using USB-C for signal and data connection, you can easily switch input signals and use the same mouse and keyboard set between the two computers.
- USB-B & USB-C: When you connect two computers to a monitor using HDMI and DP cables, with a USB cable and USB-C to A cable for data upstream, you will need to configure the data upstream method for each input source individually. Once this setup is properly established, you can easily switch between input signals and use the same mouse and keyboard set between the two computers.
Appendix
Specifications
| Category | Specification | Value | |
|---|---|---|---|
| Display | Type | a-Si TFT Active Matrix 3440 × 1440 LCD, 0.23 (H) mm × 0.23 (V) mm pixel pitch |
|
| Display Size | 86.4 cm / 34 in. (viewable) | ||
| Color Filter | RGB Vertical Stripe | ||
| Glass Surface | Anti-Glare (Haze 25%), Hard Coating (3H) | ||
| Input Signal | Frequency | HDMI | fh: 30–160 kHz; fv: 24–120 Hz |
| DisplayPort | fh: 30–185 kHz; fv: 24–120 Hz |
||
| Type C | fh: 30–185 kHz; fv: 24–120 Hz |
||
| Compatibility | PC | up to 3440 × 1440 | |
| Macintosh | up to 3440 × 1440 | ||
| Resolution and Timings[1] | Preset | 3440 × 1440 @ 60 Hz | |
| Supported |
|
||
| Power[4] | Input Voltage | AC 100–240V, 50/60Hz (auto switch) | |
| Display Area | Active Size (H × V) | 797.22 × 333.72 mm 31.39 × 13.14 in. |
|
| Operating Conditions | Altitude | 3.048 km (10,000 ft) | |
| Relative Humidity | 20% to 90% (non-condensing) | ||
| Temperature | 0° C to 40° C 32° F to 104° F |
||
| Storage Conditions | Altitude | 12.1 km (40,000 ft) | |
| Relative Humidity | 5% to 90% (non-condensing) | ||
| Temperature | -20° C to 60° C -4° F to 140° F |
||
| Dimensions (with stand) | Physical (W × H × D) | 809 × 593 × 269 mm 31.85 × 23.35 × 10.59 in. |
|
| Weight (with stand) | Physical | 10.6 kg (23.4 lb) | |
| Wall Mount | Dimensions | 100 × 100 mm | |
| Power Consumption | On[5] | 168W (Typical) | |
| Off | ≤ 0.3 W (Maximum) | ||
- ↑ Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
- ↑ Disclaimer: When displaying 3440 × 1440 @ 75/100/120Hz resolution via USB-C, if USB-C 3.2 is set to “ON”, the video input will only support YCbCr 4:2:2 format, please check if your graphics card supports it. If USB-C 3.2 is set to “OFF”, the video input can support RGB format, but data transfer & Ethernet speed will be limited to USB 2.0 due to bandwidth limitation.
- ↑ Timing: 3440 × 1440 @ 120Hz is only available for DisplayPort and USB-C inputs.
- ↑ Please use the power adapter/power cord from ViewSonic® or an authorized source only.
- ↑ The test condition follows EEI standards.
Hot Keys
When the On-Screen Display (OSD) Menu is off, you can quickly access special functions by using the Joy Key.
| Key | Description |
|---|---|
| Press and hold the key to lock/unlock the OSD Menu. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the OSD Menu. If the OSD Menu is locked, the below message will appear on the screen: |
|
| Press and hold the key to lock/unlock the Power button. When the menu appears on the screen, continue holding the key for 10 seconds to lock/unlock the Power button. If the Power button is locked, the below message will appear on the screen: |
|
| Press and hold the key to display/hide the boot up screen when the device is turned on. |
Regulatory and Service Information
Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement
CAN ICES (B) / NMB (B)
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
The following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below.
| Substance | Proposed Maximum Concentration | Actual Concentration |
|---|---|---|
| Lead (Pb) | 0.1% | < 0.1% |
| Mercury (Hg) | 0.1% | < 0.1% |
| Cadmium (Cd) | 0.01% | < 0.01% |
| Hexavalent Chromium (Cr6+) | 0.1% | < 0.1% |
| Polybrominated biphenyls (PBB) | 0.1% | < 0.1% |
| Polybrominated diphenyl ethers (PBDE) | 0.1% | < 0.1% |
| Bis (2-ethylhexyl) phthalate (DEHP) | 0.1% | < 0.1% |
| Butyl benzyl phthalate (BBP) | 0.1% | < 0.1% |
| Dibutyl phthalate (DBP) | 0.1% | < 0.1% |
| Diisobutyl phthalate (DIBP) | 0.1% | < 0.1% |
Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:
- Copper alloy containing up to 4% lead by weight.
- Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
- Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
- Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher.
Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
- USA & Canada: Go Green with ViewSonic
- Europe: Environmental, Social & Governance — Recycle
- Taiwan: Taiwan Recycling Information
For EU users, please contact us for any safety/accident issue experienced with this product:
Flevolaan 38, 1382JZ, Weesp,
the Netherlands
Copyright Information
Copyright © 2023 ViewSonic® Corporation. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Noto Sans Font. Copyright 2018 The Noto Project Authors. This Font Software is licensed under the SIL Open Font License, Version 1.1.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
This Copyright Information may be translated into multiple languages. All translated versions are provided for reference only. In the event of any discrepancy or inconsistency among different language versions, the English version shall prevail.
Version
VG3419C_UG_ENG_1c_20240320