Package Contents

Letter	Quantity	Description	Note
A	2	Bolts	M6 x 14mm
B	6	Nuts	M8
C	4	Bolts	M5 x 25mm
D	4	Bolts	M6 x 25mm
E	4	Bolts	M8 x 25mm
F	4	Bolts	M4 x 8mm
G	1	Hex Tool	4mm
H	1	Wrench
I	4	Caster Covers	Left Covers (x2) Right Covers (x2)
J	2	Attachable Cord Clamps
K	1	Control Pad
L	1	USB Type A to USB Type A cable
M	2	Trolley Bases
N	2	Mounting Brackets
O	1	Power Extension Cord
P	1	Power Cord
Q	1	Keyboard Tray

Note: The power cord included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

Front and Side View

Front View
Side View

I/O Ports and Controls

Number	Port	Description
1	USB A ^[1]	USB A Port
2	Lift Up/Down Buttons	Adjust Lift Height
3	RJ45 ^[2]	RJ45 Port
4	AC Out	Power Output Socket
5	AC In	Power Input Socket

↑ Only use the USB-A port to connect with IFP. Lift can be controlled via the app on the IFP.
↑ Only use the RJ45 port to connect with the Control Pad.

Assembling the Product

Step 1

Prepare the following items:

Align the three holes on the Trolley Base (M) to the bolts underneath the Trolley Body. Using the wrench (H), secure the Trolley Base to the Trolley Body with the nuts (B).

Ensure all nuts are tightened properly on the assembled Trolley Cart.

Step 2
Attach the Mounting Brackets (N) to the IFP. Depending on the size of the IFP, use either M5 (C), M6 (D), or M8 (E) bolts. Refer to the IFP user guide to find the right bolt size.

Step 3
Attach the Keyboard Tray (Q) to the middle support.

Step 4

Lift the IFP up and hook the Mounting Brackets onto the Trolley Cart.

Note: It is recommended to perform this step with two or more people to avoid personal injury and/or damage to the IFP and Trolley Cart.

Secure the Mounting Brackets to the Trolley Cart with two M6 x 14mm bolts (A).

Step 5

Unscrew the M4 x 8mm bolts (F) and remove the Protective Cover from the Trolley Cart. Attach the Chrome Box onto the Trolley Cart.

Note: This product does not include an Chrome Box.

Reattach the Protective Cover onto the Trolley Cart with the M4 x 8mm bolts, covering the Chrome Box.

Ensure all parts are accurately and securely held together, as shown in the diagrams below.

Step 6
After moving the Trolley Cart to desired location, push down on the wheel brakes to lock the Trolley Cart in place.

Step 7
Install the Caster Covers (I) to further secure the Trolley Cart in place.

Note: It is recommended to install the Caster Covers to avoid personal injury and/or damage to the IFP and Trolley Cart.

Ensure the wheels are aligned with the Trolley Cart.

Slide the Caster Covers over the wheels.

Note: The Caster Covers automatically locks the wheel brakes.

Storing the Caster Covers

The Caster Covers are magnetic. Refer to the diagram below for the position of the magnet.

When moving the Trolley Cart, attach the Caster Covers to the left and right supports.

Connecting to Power

Connect the power cord to the Trolley Cart.
Connect the power cord to a power outlet.

Use the cord clamp to secure the cords in place.

Connecting to the Control Pad

Connect the Control Pad to the Trolley Cart via the RJ45 Port.

Note: The Control Pad has a magnet on the back. The Control Pad can be attached to any metal zone on the Trolley Cart. Make sure the attached area does not obstruct the Lift functions.

Connecting to the IFP

Connect the IFP to the AC power output of the Trolley Cart.
Connect the USB Type A cord to both the IFP and the Trolley Cart.

Overview

Read this section to learn how to adjust the height of the Trolley Cart by using the Lift function.
There are three ways to control the Lift:

Using the Trolley Cart.
Using the Control Pad.
Using the App on the IFP.

Using the Trolley Cart or Control Pad

Item	Icon	Description
Lift Up		Press and hold to raise the VB-STND-007.
Lift Down		Press and hold to lower the VB-STND-007.

Using the App on the IFP

Select the More Options Icon (...) from the side tool bar.

Select Trolley Cart Control.

Adjust the height of the Trolley Cart accordingly.

Item	Icon	Description
Lift Up		Press and hold to raise the VB-STND-007.
Lift Down		Press and hold to lower the VB-STND-007.
Preset Position 1		Adjust the Lift to desired height. Long press to save current height as Preset Position 1.
Preset Position 2		Adjust the Lift to desired height. Long press to save current height as Preset Position 2.
Preset Position 3		Adjust the Lift to desired height. Long press to save current height as Preset Position 3.
Stop		When using the Preset Position function, the Lift will adjust to the saved height. If you want to stop this process, press to stop height adjustment and motor movement.

Technical Specifications

Model No.	P/N
VS18669	VB-STND-007

Item	Specifications
Swivel	360° by 4” silent wheel
Height Adjust Range	560 mm (22.05 in)
Wall Mount Pattern	800 x 600 mm max.
Material	Aluminum Alloy, Plastic, Steel
Wall Mount Loading	75 kg max. (165 lb max.)
Keyboard Tray Loading	10 kg max. (22 lb max.)
Input Voltage	AC 100v ~ 240v 50/60Hz 10A
Output Voltage (For IFP Power)	AC 100v ~ 240v 50/60Hz 6A
Control Panel	Trolley Cart: Lift Up/Down Control Pad: Lift Up/Down IFP App: Lift Up/Down, Preset Position 1~3, Stop
Dimensions (W x H x D)	1248.9 x (1330.7 ~ 1890.7) x 706 mm (49.17 x (52.4 ~ 74.44) x 28.19 in)
Weight	64 kg (141 lb)
Motor Speed	33 mm/second (1.3 in/second)
Lift Safety Sensor	11 ~ 15 kg (24.25 ~ 33.07 lb)

Troubleshooting Common Problems

This section describes some common problems that you may experience when using the Trolley Cart.

Problem or Issue	Possible Solutions
No power	Plug another electrical device into the power outlet to verify that the outlet is supplying power. Ensure the power cord is properly and securely connected to the device and power outlet. If the Trolley Cart works but not the IFP, ensure the power cords are properly and securely connected to the IFP and the Trolley Cart.
Lift is not moving	Via Trolley Cart: Ensure the power cord is connect properly. Ensure the outlet is supplying power. Via Control Pad: Ensure the Control Pad Cable is properly and securely connected to the Trolley Cart. Via app on IFP: Ensure the USB cable is properly and securely connected to the Trolly Cart and IFP.

Using the ViewBoard Stand Safely

Please read the following Safety Precautions before you start using the device.

Keep this user guide in a safe place for later reference.
Read all warnings and follow all instructions.
To prevent damage, avoid any physical pressure, vibration, or immersion during transportation, possession, or installation of the product.
Always place the product on a flat, stable surface.
Avoid contacting any liquids, gas, or corrosive materials with the shell of the product.
This product has no parts which can be repaired by the user. Any damage caused by the user's own disassembly is not covered by warranty.
This product is special use with ViewSonic® commercial Touch Display only, Use with other model is capable of resulting in instability causing possible injury.
This product is only compatible with panels up to a maximum size of 86”.
The maximum weight loading of this product is 75 kg (165 lb).
Avoid the following to prevent the personal injury and/or equipment damage:

Children MUST NOT operate plant or machinery.
KEEP AWAY from moving parts to avoid injury.
DO NOT move the cart with the lift in the highest position.
DO NOT push the cart from the front or attempt to lift it.
DO NOT move the cart by pushing on the IFP/panel.
DO NOT move the cart over cords or uneven, dirty, and/or slopes.

Compliance Information

This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Statement

CAN ICES-003(B) / NMB-003(B)

CE Conformity for European Countries

The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.

The following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance	Proposed Maximum Concentration	Actual Concentration
Lead (Pb)	0.1%	< 0.1%
Mercury (Hg)	0.1%	< 0.1%
Cadmium (Cd)	0.01%	< 0.01%
Hexavalent Chromium (Cr6⁺)	0.1%	< 0.1%
Polybrominated biphenyls (PBB)	0.1%	< 0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%	< 0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%	< 0.1%
Butyl benzyl phthalate (BBP)	0.1%	< 0.1%
Dibutyl phthalate (DBP)	0.1%	< 0.1%
Diisobutyl phthalate (DIBP)	0.1%	< 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:

Copper alloy containing up to 4% lead by weight.
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125V AC or 250V DC or higher.

Indian Restriction of Hazardous Substances

Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Product Disposal at End of Product Life

ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.

USA & Canada
https://www.viewsonic.com/us/go-green-with-viewsonic

Europe
https://www.viewsonic.com/eu/environmental-social-governance/recycle

Taiwan
https://recycle.moenv.gov.tw

For EU users, please contact us for any safety/accident issue experienced with this product:

	ViewSonic Europe Limited Haaksbergweg 75 1101 BR Amsterdam Netherlands
	+31 (0) 650608655
	EPREL@viewsoniceurope.com
	https://www.viewsonic.com/eu/

Copyright Information

Macintosh and Power Macintosh are registered trademarks of Apple Inc.

Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.

ViewSonic®, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic® Corporation.

VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.

Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.

VB-STND-007_UG_ENG_1a_20220704

[1] Only use the USB-A port to connect with IFP. Lift can be controlled via the app on the IFP.

[2] Only use the RJ45 port to connect with the Control Pad.

[1]

[2]