VA2214-H VA2214-MH Specifications

From ViewSonic Documentation
Jump to: navigation, search


Technical Specifications

Item Category Specifications
LCD Type IPS, Color a-Si TFT Active Matrix 1920 x 1080 LCD;

0.2493 (H)mm x 0.241 (V)mm pixel pitch

Display Size 54.48 cm

(21.45" real diagonal)

Color Filter RGB vertical stripe
Glass Surface Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal Video Sync

Analog

D-Sub: fh:24~86 kHz, fv:48~75 Hz

TMDS digital (100 Ω)

HDMI (v. 1.4): fh:30~115 kHz, fv:48~100 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Resolution[1] Recommended 1920 x 1080 @ 60Hz
Supported
  • 1920 x 1080 @ 50, 60, 75, 100Hz[2]
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1440 x 576 @ 50Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 1024 x 600 @ 60Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 67, 73, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power[3] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan
(H x V)
478.656 x 260.28 mm

(18.84” x 10.25”)

Operating Conditons Temperature 0° C to 40° C

(32° F to 104° F)

Humidity 20% to 90% (non-condensing)
Altitude 16,404.2 feet

(5 km)

Storage Conditions Temperature -20° C to 60° C

(-4° F to 140° F)

Humidity 5% to 90% (non-condensing)
Altitude 39,370.1 feet

(12 km)

Dimensions Physical
(W x H x D)
493.36 x 385.28 x 206.32 mm

(19.4” x 15.17” x 8.12”)

Wall Mount Dimensions 100 x 100 mm
Weight Physical 2.4 kg

(5.2 lbs.)

Power Consumption On[4] 7W (Typical) without audio

19.5W (Typical) with 50% audio[5]

Off ≤ 0.3W
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. For HDMI only.
  3. Please use the power adapter from ViewSonic® or an authorized source only.
  4. The test condition follows EEI standards.
  5. For VA2214-MH only.