TD2223 Specifications

From ViewSonic User Guide Database
Jump to navigation Jump to search
Backtotop.svg

Technical Specifications

TD2223.png
Model No. P/N
VS18311 TD2223
Item Category Specifications
LCD Type a-si, TFT Active Matrix 1920 x 1080 LCD,

0.2482 mm x 0.2482 mm pixel pitch

Display Size 54.69 cm, 24" (21.53" viewable)
Surface Treatment Anti-glare treatment of the polarizer (Haze 8%, 7H)
Input Signal Video Sync RGB Analog (75 Ω)
fh:24-82 Khz, fv:50-75 Hz

TMDS digital (100 Ω)

HDMI: fh:24-82 Khz, fv:50-75 Hz
DVI: fh:24-82 Khz, fv:50-75 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Recommended 1920 x 1080 @ 60Hz
Resolution[1] Supported
  • 1920 x 1080 @ 50, 60, 75Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1400 x 1050 @ 60Hz
  • 1366 x 768 @ 60 Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 50, 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 1024 x 600 @ 60Hz
  • 832 x 624 @ 75Hz
  • 848 x 480 @ 60Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 800 x 480 @ 60Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 67, 72, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan (H x V) 476.64 x 268.11 mm (18.76” x 10.56”)
Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions Physical

(W x H x D)

521.28 x 333.85 x 100.53 mm

(20.54” x 13.15” x 3.96”)

Weight Physical 4.47 kg (9.86 lbs)
Power Saving Modes On 12.9W (Typical)
Off < 0.3W (Max)
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.