TD1607
Introduction
Package Contents
- Monitor
- USB cable
- Protective cover
- Quick start guide
Product Overview
Front and Left Side View
- I/O Ports
Rear and Right Side View
- Dial
- Power LED
- Power Button
- Internal Speakers
Bottom View
I/O Ports
Left Side
- DC In
- USB Type C
- Mini HDMI
Right Side
- Audio Out
Initial Setup
Mounting the Monitor
After removing the stand, the monitor can be mounted using an optional mounting kit.
| Maximum Loading | Hole Pattern (W × H) | Screw Specification | Screw Quantity |
|---|---|---|---|
| 14 kg | 75 mm | M4 × 7 mm | 2 |
- Attach the mounting bracket to the VESA mounting holes at the rear of the monitor, securing it with screws.
- Follow the mounting kit instructions to mount the monitor.
Making Connections
Connecting to Power
Connecting to External Devices
Power Delivery
The monitor has two USB Type C ports on the left side: one is designed to receive only power from a power outlet, and the other is for connecting your devices.
Choose Your Setup
- Single cable setup: Connect your device directly to the monitor’s upstream USB port. The connected device will transfer audio, video, and power to the monitor at the same time.
- Two cable setup (device charging): Plug a power adapter into the monitor’s DC In port, and connect your device to the upstream USB port. The monitor automatically detects the power source and sends up to 65W of power to charge the connected device.
Note: The connected power adapter must supply at least 80W (20V/4.0A) for the monitor to provide up to 65W of power to the connected device.
- HDMI setup: Plug a power adapter into the monitor’s DC In port for power, and connect your device to the HDMI port for video.
Connection Guidelines
- Use the included USB Type C cable, or alternatively a full-featured USB Type C cable that supports DP Alt Mode (DP 1.2) and 65W (20V/3.25A) power delivery.
- Connect only one video source (a laptop, desktop, or mobile device) to the monitor at a time. Connecting multiple sources can cause power conflicts, resulting in screen flickering or shutdowns.
- A connected mobile device will only charge when the monitor is connected to a power adapter.
Use the table below as a guide for how different power sources affect the monitor.
| Power Source | Default Brightness | Minimum Wattage Required | Description |
|---|---|---|---|
| Power Adapter | 100 | 10W | Supplies power to the monitor and passes up to 65W of power to a connected device. |
| Laptop | 100 | 10W | Connects an HDMI cable for video and a USB cable for power. |
| Mobile Devices | 10 | 10W | Connects a USB cable to the monitor’s upstream USB port to power the monitor and display the screen. |
Using the Monitor
Adjusting the Viewing Angle
Tilt Angle Adjustment
Tilt the monitor backwards to the desired viewing angle (20° to 30°).
- To adjust the monitor, support the stand with one hand and gently tilt the screen with the other.
- For the best results, use a tilt angle between 20° and 30°.
Turning the Monitor On/Off
- Make sure the monitor is connected to power.
- Press the Power button to turn on the monitor.
- To turn the monitor off, press the Power button again.
Using the Dial
Use the Dial to open the Shortcut Menu, use Hot Keys, navigate the On-Screen Display Menu, and change settings.
Menu Operation
Shortcut Menu
Press the Dial to open the Shortcut Menu.
| Menu | Description |
|---|---|
| ViewMode | Sets a preset display option. |
| Volume | Adjusts the volume level. |
| Contrast/Brightness | Adjusts the contrast or brightness level. |
| Input Select | Sets the input source. |
| Exit | Closes the Shortcut Menu. |
On-Screen Display Menu
Appendix
Specifications
| Category | Specification | Value | |
|---|---|---|---|
| Display | Type | IPS type, a-si TFT Active Matrix 1920 × 1080 LCD; 0.17925 (H) mm × 0.17925 (V) mm pixel pitch | |
| Display Size | 39.5 cm / 15.6 in. (viewable) | ||
| Color Filter | RGB Vertical Stripe | ||
| Glass Surface | Anti-Glare (Haze 25%), Hard Coating (3H) | ||
| Input Signal | Frequency | Type C | fh: 24–82 kHz; fv: 50–75 Hz |
| HDMI | fh: 15–82 kHz; fv: 50–75 Hz |
||
| Version | Type C | USB 3.2 Gen 2 | |
| HDMI | 1.4 | ||
| Compatibility | PC | up to 1920 × 1080 | |
| Macintosh | up to 1920 × 1080 | ||
| Resolution and Timings[1] | Preset | 1920 × 1080 @ 60 Hz | |
| Supported |
|
||
| Power[2] | Input Voltage | AC 100–240V, 50/60 Hz (auto switch) | |
| Audio | Internal Speaker | 2 × 1W | |
| Display Area | Active Size (H × V) | 344.16 × 193.59 mm 13.55 × 7.62 in. |
|
| Operating Conditions | Altitude | 5 km (16,404 ft) | |
| Relative Humidity | 20% to 90% (non-condensing) | ||
| Temperature | 0° C to 40° C 32° F to 104° F |
||
| Storage Conditions | Altitude | 12 km (39,370.1 ft) | |
| Relative Humidity | 5% to 90% (non-condensing) | ||
| Temperature | -20° C to 60° C -4° F to 140° F |
||
| Dimensions (with stand) | Physical (W × H × D) | 355.5 × 210.8 × 12.6 mm 14.00 × 8.30 × 0.50 in. |
|
| Weight (with stand) | Physical | 0.8 kg (1.76 lb) | |
| Wall Mount | Dimensions | 75 × 75 mm | |
| Power Consumption | On[3] | 8W (without audio) 8.6W (with 50% audio) |
|
| Standby | ≤ 0.5 W (Maximum) | ||
| Off | ≤ 0.3 W (Maximum) | ||
 |
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. |
On-Screen Display Menu Tree
Input Select
| Menu Option |
|---|
| Type C · HDMI |
Audio Adjust
| Sub-menu | Menu Option |
|---|---|
| Volume | 0–100/1 |
| Mute | On · Off |
ViewMode
| Sub-menu | Menu Option |
|---|---|
| Off | — |
| Office | Web · Text |
| Movie | — |
| MAC | — |
| Mono | — |
| Game | FPS 1 · FPS 2 · RTS · MOBA |
Color Adjust
| Sub-menu | Menu Option |
|---|---|
| Contrast/Brightness | Contrast: 0–100/1 · Brightness: 0–100/1 |
| Color Temperature | sRGB · Bluish · Cool · Native · Warm User Color:
|
| Color Space | Auto · RGB · YUV |
| Color Range | Auto · Full Range · Limited Range |
Manual Image Adjust
| Sub-menu | Menu Option |
|---|---|
| Sharpness | 0–100/25 |
| Dynamic Contrast | 0–100/1 |
| Response Time | Standard · Advanced · Ultra Fast |
| Aspect Ratio | 4:3 · Full Screen |
| Blue Light Filter | 0–100/1 |
Setup Menu
| Sub-menu | Menu Option |
|---|---|
| Language Select | English · Français · Deutsch · Nederlands · Español · Italiano · Svenska · Русский · Türkçe · Polski · Češka · Română · ไทย · Tiếng Việt · Bahasa Indonesia · 日本語 · 繁體中文 · 简体中文 |
| Resolution Notice | On · Off |
| Information | — |
| OSD Timeout | 5 · 15 · 30 · 60 |
| OSD Background | On · Off |
| Power Indicator | On · Off |
| Boot Up Screen | On · Off |
| Auto Power Off | On · Off |
| Sleep | 30 minutes · 45 minutes · 60 minutes · 120 minutes · Off |
| ECO Mode | Standard · Optimize · Conserve |
| DDC/CI | On · Off |
| Auto Detect | On · Off |
Memory Recall
| Menu Option |
|---|
| — |
Hot Keys
When the On-Screen Display Menu is off, you can access special functions with the Dial.
| Function | Description |
|---|---|
| Lock or unlock the On-Screen Display Menu | Press and hold the Power button and Dial up. When the menu appears, continue holding both keys for five seconds. |
| Lock or unlock the Power button | Press and hold the Power button and Dial down. When the menu appears, continue holding both keys for five seconds. |
| Switch between DDC/CI and DDC/2B | Move the Dial key down to switch between DDC/CI and DDC/2B. |
Regulatory and Service Information
Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Industry Canada Statement
CAN ICES (B) / NMB (B)
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
The following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below.
| Substance | Proposed Maximum Concentration | Actual Concentration |
|---|---|---|
| Lead (Pb) | 0.1% | < 0.1% |
| Mercury (Hg) | 0.1% | < 0.1% |
| Cadmium (Cd) | 0.01% | < 0.01% |
| Hexavalent Chromium (Cr6+) | 0.1% | < 0.1% |
| Polybrominated biphenyls (PBB) | 0.1% | < 0.1% |
| Polybrominated diphenyl ethers (PBDE) | 0.1% | < 0.1% |
| Bis (2-ethylhexyl) phthalate (DEHP) | 0.1% | < 0.1% |
| Butyl benzyl phthalate (BBP) | 0.1% | < 0.1% |
| Dibutyl phthalate (DBP) | 0.1% | < 0.1% |
| Diisobutyl phthalate (DIBP) | 0.1% | < 0.1% |
Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below. Examples of exempted components are:
- Copper alloy containing up to 4% lead by weight.
- Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).
- Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.
- Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher.
Indian Restriction of Hazardous Substances
Restriction on Hazardous Substances statement (India). This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Product Disposal at End of Product Life
ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic® website to learn more.
- USA & Canada: Go Green with ViewSonic
- Europe: Environmental, Social & Governance — Recycle
- Taiwan: Taiwan Recycling Information
For EU users, please contact us for any safety/accident issue experienced with this product:
Flevolaan 38, 1382JZ, Weesp,
the Netherlands
Copyright Information
Copyright © 2026 ViewSonic® Corporation. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic® and the three birds logo are registered trademarks of ViewSonic® Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS, DisplayPort, and DDC are trademarks of VESA.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Noto Sans Font. Copyright 2018 The Noto Project Authors. This Font Software is licensed under the SIL Open Font License, Version 1.1.
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic® Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic® Corporation.
This Copyright Information may be translated into multiple languages. All translated versions are provided for reference only. In the event of any discrepancy or inconsistency among different language versions, the English version shall prevail.
Version
TD1607_UG_ENG_1b_20260901
See Also
Customer Service
Limited Warranty
Safety Precautions
Troubleshooting
Maintenance