View source for VP3256-4K Advanced Features and Settings

<noinclude>  {{Top}}
{{Sticky_Menu_Monitor_3.0_SUF
|1=VP3256-4K_Introduction
|2=VP3256-4K_Initial_Setup
|3=VP3256-4K_Connecting_Power_and_Devices
|4=VP3256-4K_Adjusting_the_Viewing_Angle
|5=VP3256-4K_Quick_Menu
|6=VP3256-4K_Hot_Keys
|7=VP3256-4K_On-Screen_Display_Menu
|8=VP3256-4K_On-Screen_Display_Menu_Tree
|9=VP3256-4K_On-Screen_Display_Menu_Options
|10=VP3256-4K_Advanced_Features_and_Settings
|11=VP3256-4K_Specifications
|12=VP3256-4K_Regulatory_and_Service_Information
}}
</noinclude>
=Auto Pivot=
With the Auto Pivot function, the monitor can detect the image display and adjust the image’s orientation on the screen automatically when pivoting the screen vertically or horizontally.

:<small>'''NOTE:''' The Auto Pivot function uses DDC/CI to communicate with the monitor. Before applying the Auto Pivot function, please make sure the DDC/CI setting is set to '''On'''.</small>

<div class="res-img">[[File:VP3256-4K_Auto_Pivot.png|500px]]</div>

To enable the DDC/CI setting:
# Open the OSD Menu and select the '''Setup Menu''' menu. Then press the '''3''' key to enter the menu.
# Press the '''1''' or '''2''' key to select '''DDC/CI'''. Then press the '''3''' key to enter its sub-menu.
# Press the '''1''' or '''2''' key to select '''On'''. Then press the '''3''' key to confirm.

After ensuring '''DDC/CI''' is '''On''', proceed to set '''OSD Pivot''' to '''Auto''':
# Open the OSD Menu and select the '''Setup Menu''' menu. Then press the '''3''' key to enter the menu.
# Press the '''1''' or '''2''' key to select OSD Pivot. Then press the '''3''' key to enter its submenu.
# Press the '''1''' or '''2''' key to select Auto. Then press the '''3''' key to confirm.

=Colorbration+=
To ensure long-term color accuracy, some specific models support the hardware color calibration function. The Colorbration+ application installation file can be found at: http://color.viewsonic.com/support/software/.

Standard monitor packing does not include the color sensor, which the Colorbration+ application needs for the calibration process.

Compatible color sensors include:
* X-Rite i1 Display Pro
* X-Rite i1 Pro 2
* X-Rite i1 Studio
* Xrite Colormunki Photo
* Xrite Colormunki Design
* Datacolor Spyder 5
* Datacolor SpyderX series

=Colorblindness Mode=
Through the vDisplayManager software, this display supports two Color Blindness modes:
* '''Color Filter'''

Users who are color blind can activate the ''Color Filter'' feature to better see on-screen details.

:<div class="res-img">[[File:VP_Color_Blindness_Mode_1.png|500px]]</div>

<small>'''NOTE:''' The vDisplayManager software can be downloaded at: https://color.viewsonic.com/support/software/</small>

=Firmware Update=
For the best display performance and to resolve any known issues, it is best to keep your monitor updated with the latest firmware version. With the supplied USB cable and the vDisplayManager application, you can easily update your monitor’s firmware.

To update the firmware:
<div class="res-img">[[File:VP3256-4K_FW_Update.png|600px]]</div>
# Download and install the vDisplayManager application: https://color.viewsonic.com/support/software/.
# Connect the USB Type B male cable (square with 2 cut corners) to the USB Type B port of your monitor. Then connect the other end of the cable to the USB port of the computer.
# Launch vDisplayManager. Select the '''Advanced''' tab in the side menu.
# Click '''Update''' to check for any updates to your monitor’s firmware.
# Wait until the update process is complete (if applicable).
::<small>'''NOTE:''' Any interruptions during the firmware update process may permanently damage your monitor. Do not disconnect the USB cable or turn off your PC and monitor.</small>

{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=VP3256-4K, Auto Pivot, Colorbration+, Color Blindness Mode, Firmware Update
|description=VP3256-4K's Advanced Features and Settings.
}}

[[Category:VP3256-4K]]