VB-CAM-201 Introduction
Package Contents
- VB-CAM-201
- Documentation
- Remote Control
- Power Adapter
- Bracket
- USB Cable
- Bracket Screw x 6
- Wall Anchor x 6
Product Overview
VB-CAM-201
I/O Ports
| Number | Item |
|---|---|
| 1 | DC IN |
| 2 | USB 3.0 |
| 3 | Reset Button |
| 4 | HDMI |
| 5 | USB 2.0 |
| 6 | RJ45 |
- NOTE:
- The HDMI port only supports video output.
- The RJ45 port only supports parameters management.
- The USB 2.0 port supports 2.0 output which is only designed for external USB microphone use.
Remote Control
| Number | Button | Description |
|---|---|---|
| 1 | Camera Disable | Disable/Enable the video. |
| 2 | Call | Answer/Start call/Enter call interface[1]. |
| 3 | Control Key | Menu Control/Camera moving direction. |
| 4 | Volume Up/Down | Audio volume control. |
| 5 | Exit Tracking | After pressing, the camera will exit the tracking mode. |
| 6 | Speaker Tracking | Press for voice tracking of the speaker. |
| 7 | Preset 1 | Long press to set Preset 1; short press to call Preset 1. |
| 8 | Preset 2 | Long press to set Preset 2; short press to call Preset 2. |
| 9 | Standby | Long press to enter Standby mode; short press to return to Normal mode. |
| 10 | Hang Up | Hang up the call/Reject to join the meeting[1]. |
| 11 | OK (Confirm) | Confirm selection/Camera returns to home position. |
| 12 | Microphone Mute | Disable/Enable the microphone. |
| 13 | Zoom | Zoom In/Out. |
| 14 | Speaker Mute[2] | Disable/Enable the speaker. |
| 15 | Participant Tracking[3] | The camera will automatically track the participants. |
| 16 | Menu | Enter/Exit the OSD menu. |
| 17 | Bluetooth | Disable/Enable Bluetooth. Long press to switch Host and Client mode after Bluetooth is enabled. |
- ↑ 1.0 1.1 For "Skype for Business" and "Microsoft Teams" only.
- ↑ Long press to disable the audio function completely. External devices will not detect the VB-CAM-201 as a speaker or microphone. If the function is disabled, a mute icon will be on screen.
- ↑ Long press to enter “Live Mosaic View” mode.
Replacing the Batteries of the Remote Control
- Remove the cover on the rear of the remote control.
- Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.
- Replace the cover by aligning it with the slot on the remote control and snapping the latch shut. NOTE:
- Avoid leaving the remote control or batteries in excessive heat or humidity.
- Always dispose of old batteries in an environmentally friendly way. Contact your local government for more information on how to dispose of batteries safely.
- Remove the batteries if the remote control will not be in use for an extended period of time.
- It is recommended that you do not mix battery types.