ViewBoard Cast

Working with ViewBoard® Cast software, the vCastReceiver app, will allow the ViewBoard® to receive vCastSender laptop screens (Windows/Mac/Chrome) and mobile (iOS/Android) users’ screens, photos, videos, annotations, and camera(s).

Network Information

ViewBoard® Cast software, laptops, and mobile devices can connect to both the same subnet and across the subnet network.
Connected devices will show up under “Device List” on the same subnet connection.
If the device does not show up under “Device List”, users will need to key-in the on-screen PIN-code.

ViewBoard Cast is a wireless peer to peer data communication, therefore the below port settings are required:

Ports:

CP: 56789, 25123, 8121, and 8000
UDP: 48689 and 25123

Port and DNS activation:

Port: 8001
DNS: h1.ee-share.com

Cast Sender from Windows-based, Macbook, and Chrome Devices

Windows, Mac, Chrome Devices:

Make sure your device is connected to the same network as the ViewBoard.
Visit the address that is shown on the ViewBoard to download the application.
Launch the application and click the connect icon next to the Device Name.

NOTE: If the device is not listed, click Connect with PIN-Code and input the pin-code displayed on the ViewBoard.

Cast Sender from Mobile Devices: iOS-based (iPhone, iPad) and Android OS based phone/tablet

Android/iOS:

Make sure your device is connected to the same network as the ViewBoard.
Scan the QR Code that is shown on the ViewBoard to download directly from the server, or download from the Google Play Store or the Apple Store.
Launch the application and select the correct Device Name and input the pin to connect. You can also directly input the pin-code displayed on the ViewBoard to connect.