• Print Print

LS901HD LS901-4K Mounting the Projector

From ViewSonic Documentation
Revision as of 05:55, 8 November 2024 by VY (talk | contribs) (// via Wikitext Extension for VSCode)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Mounting the Projector

Note: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To make sure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Make sure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 10
    • Maximum Screw Length: 10 mm
      Mounting points
CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LS901HD_LS901-4K_Mounting_the_Projector&oldid=55122"