Projector Troubleshooting/zh

排除常見問題

投影機未開啟

可能解決方法1 ► 確定電源線已正確連接至投影機和電源插座。

可能解決方法2 ► 如果散熱程序未完成，請等到完成後再嘗試再次開啟投影機。

可能解決方法3 ► 如果上述方法無效，請嘗試使用其他電源插座、或其他具有相同電源插座的電氣裝置。

可能解決方法4 ► Check that the battery has remaining power, or needs external power.

Why is there no picture?

Solution 1 ► Ensure the video source cable is connected properly, and that the video source is turned on.

Solution 2 ► If the input source is not selected automatically, select the correct source with the Source key on either the projector or the remote control.

What should I do if the image is blurry?

Solution 1 ► Adjusting the Focus Ring will help correctly focus the projection lens.

Solution 2 ► Ensure the projector and screen are aligned properly. If necessary, adjust the height of the projector as well as the projection angle and direction.

Why is the remote control not working?

Solution 1 ► Ensure there are no obstacles between the remote control and projector; and that they are within 8 m (26 ft) of each other.

Solution 2 ► The batteries may be out of power, please check and replace if necessary.

What should I do if the projector freezes or doesn't respond?

Solution ► Using a paper clip, carefully insert it into the Reset button at the rear of the projector to reset the device.

Online Support Center