• Print Print

VPC35 Using the Device

From ViewSonic Documentation
Revision as of 03:59, 3 July 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC35_Introduction |2=VPC35_Initial_Setup |3=VPC35_Making_Connections |4=VPC35_Using_the_Device |5=VPC35_Appendix |6=VPC35_Regulatory_and_Service_Information }} </noinclude> =Selecting an Input Source= ==IFP Series== <div class="res-img">500px</div> To select an input source: <ol><li>Press '''INPUT''' on the remote control, press the setting button on the front panel, or press the Settings icon fro...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VPC35 Using the Device
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Selecting an Input Source

IFP Series

To select an input source:

  1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
  2. Press ▼/▲/◄/► on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control, or touch the input source directly.
  4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

CDE Series

To select an input source:

  1. Press INPUT on the remote control.
  2. Press ▼/▲ on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control.
  4. Press EPG/BACK on the remote control to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC35_Using_the_Device&oldid=28807"